Hello,
I am hoping someone can provide either pointers or direct advice on
getting TinyOS 2.x to run over a standalone Atmel Zigbit device. I have
been trying to do so for the past few days with no success. I designed a
simple breakout board for this device and followed the steps to
implement a new TinyOS platform as previously documented by Swiss
researchers for the Meshbean 900. This is my setup:
OS: Windows (Cygwin)
Device: ATZB-24-A2 (Zigbit)
Programmer: AVRisp MKII
LEDs connected to pins 19-21 (ports G0-G2)
I am unable to at least get my LEDs lit (yes, I've tested the LEDs, they
are functional). I am able to program the device by first creating the
binary image through TinyOS, and then upload it employing AVR Studio
5.x. However, the program shows no sign of life. Building a binary image
as if it were an Iris mote won't work either. When programming the
device, I have setup fuses as: 0xFF (E), 0x99 (H), 0xE2 (L); and 0xFF
(E), 0x9C(H), 0x62(L), with no luck for either case. I've worked with
TinyOS for years now employing both the Micaz and the Telosb platform,
but it is my first time working with a Zigbit. I do not have a JTAG
programmer, so I am unable to debug the program and verify whether it is
even running properly. Any advice?
Thanks!
Sergio
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
