Hello folks,
I'm using tinyos 2.1 and trying to get the rssi noise floor reading with
telosb mote. In apps/tests/cc2420 there's an app called RssiToSerial which
does exactly what I want. But when I do "make telosb", it has following
error:
xiaowei@ubuntu:/opt/tinyos-2.1.0/apps/tests/cc2420/RssiToSerial$ make
telosb
mkdir -p build/telosb
compiling RssiToSerialC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -fnesc-separator=__
-Wall -Wshadow -Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c
-board= -DDEFINED_TOS_AM_GROUP=0x22 -DIDENT_APPNAME=\"RssiToSerialC\"
-DIDENT_USERNAME=\"xiaowei\" -DIDENT_HOSTNAME=\"ubuntu\"
-DIDENT_USERHASH=0x62d326b9L -DIDENT_TIMESTAMP=0x4eb772e4L
-DIDENT_UIDHASH=0x90025cb8L RssiToSerialC.nc -lm
In file included from RssiToSerialP.nc:57,
from RssiToSerialC.nc:51:
In interface `CC2420Config':
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/interfaces/CC2420Config.nc:64:
only commands and events can be defined in interfaces
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/interfaces/CC2420Config.nc:64:
warning: return-type defaults to `int'
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/interfaces/CC2420Config.nc:64:
syntax error before `getExtAddr'
In file included from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/control/CC2420ControlC.nc:53,
from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/csma/CC2420CsmaC.nc:58,
from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/CC2420RadioC.nc:63,
from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/CC2420ActiveMessageC.nc:75,
from
/home/xiaowei/Desktop/tinyos/tos/platforms/telosa/ActiveMessageC.nc:76,
from RssiToSerialC.nc:54:
In component `CC2420ControlP':
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/control/CC2420ControlP.nc:290:
`getExtAddr' is not in interface `CC2420Config'
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/control/CC2420ControlP.nc:82:
`CC2420Config.ieee_eui64_t' not implemented
In file included from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/receive/CC2420ReceiveC.nc:50,
from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/transmit/CC2420TransmitC.nc:94,
from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/csma/CC2420CsmaC.nc:62,
from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/CC2420RadioC.nc:63,
from
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/CC2420ActiveMessageC.nc:75,
from
/home/xiaowei/Desktop/tinyos/tos/platforms/telosa/ActiveMessageC.nc:76,
from RssiToSerialC.nc:54:
In component `CC2420ReceiveP':
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/receive/CC2420ReceiveP.nc: In
function `passesAddressCheck':
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/receive/CC2420ReceiveP.nc:837:
interface has no command or event named `getExtAddr'
/home/xiaowei/Desktop/tinyos/tos/chips/cc2420/lpl/DummyLplC.nc:39:2:
warning: #warning "*** LOW POWER COMMUNICATIONS DISABLED ***"
make: *** [exe0] Error 1
Anyone has any idea with this?
I also tried the app RssiBase in app/tutorial/RssiDemo, it says that "to
perform RSSI noise floor reading on platforms with the CC2420 radio, the
HAL component CC2420ControlP should be used". This component is used in
RssiToSerial, I tried to use it the same way here in RssiBase, but could
make it work. Any suggestions on this please?
Thanks in advance!
Sean
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
