Hi,
I meet a weird problem. (My computer is in Linux Ubuntu 10.04 and
tinyos-2.1.1)
When I install Blink on a mote, like following
zxwmit@ubuntu:/opt/tinyos-2.1.1/apps/Blink$ make micaz reinstall
mib510,/dev/ttyUSB0
cp build/micaz/main.srec build/micaz/main.srec.out
installing micaz binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyUSB0 --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out --verify
Firmware Version: 1.8
Atmel AVR ATmega128 is found.
Uploading: flash
Verifying: flash
Fuse High Byte set to 0xd9
Fuse Extended Byte set to 0xff
rm -f build/micaz/main.exe.out build/micaz/main.srec.out
But the mote does not blink at all. I also try several nodes, they do not blink
either.
Can you tell me how to fix it?
Thank you.
Napoleon
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
