Hi Johny,
Ive seen that patch already before. Sorry that I didnt mention that. But
for me I cant compile the patched repository I tried the PppRouter-App if
this matters.
I applied the patch to different revisions (HEAD,
9349b40df52930dc0cdb90a4c1d2da55a10c662a (Because it was the HEAD when the
patch was posted) ).
The first Error Message I get is:
PlatformLed.h: No such file or directory
In file included from /opt/tinyos-2.x.svn/tos/lib/ppp/PppC.nc:78,
from /opt/tinyos-2.x.svn/tos/lib/ppp/PppDaemonC.nc:56,
from PppRouterC.nc:16:
In component `LedC':
/opt/tinyos-2.x.svn/tos/system/LedC.nc:88: component PlatformLedC not found
/opt/tinyos-2.x.svn/tos/system/LedC.nc:89: no match
In file included from
/opt/tinyos-2.x.svn/tos/lib/timer/MuxAlarmMilli32C.nc:47,
from /opt/tinyos-2.x.svn/tos/lib/ppp/LcpAutomatonC.nc:72,
from
/opt/tinyos-2.x.svn/tos/lib/ppp/LinkControlProtocolC.nc:89,
from /opt/tinyos-2.x.svn/tos/lib/ppp/PppDaemonC.nc:65,
from PppRouterC.nc:16:
Regards, Gabriel
Von: Johny Mattsson <mailto:[mailto:[email protected]]>
[mailto:[email protected]]
Gesendet: Montag, 28. November 2011 23:29
An: Gabriel Neumüller
Cc: <mailto:[email protected]>
[email protected]
Betreff: Re: [Tinyos-help] IRIS support on current Blip Version
Hi Gabriel,
A while back I posted a patch for getting BLIP to work with RF230/RF212
chips to the tinyos-help list. It's not the proper way of integrating BLIP
with these chips, but it does work (we rely on it internally here), so that
might be enough for you too. Search for the archives for the thread "BLIP
2.0 with RF230/RF212" and you'll find it.
Regards,
/Johny
On Tue, Nov 29, 2011 at 12:52 AM, Gabriel Neumüller <
<mailto:[email protected]> [email protected]> wrote:
Hi all,
I tried to use the current Blip version with an IRIS Mote, but it seems,
that it only works with Motes which use cc2420 Chips. So I checked out the
git revision 48ca7e33cad3c69243800a213208ba1bf032c014 or in svn I think
its rev 5611 . With this version Blip also works with the IRIS Mote. But it
seems there was a big change between this two versions, so I dont think it
makes sense to use the older one.
Does it make sense, trying to adapt the current blip version to IRIS or is
there a major change planned? Or is somebody already working on this task?
Can I use the older version for my project or should I work with the newer
one?
Thanks
Gabriel Neumüller
_______________________________________________
Tinyos-help mailing list
<mailto:[email protected]>
[email protected]
<https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help>
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Johny Mattsson
Senior Software Engineer
DiUS Computing Pty. Ltd.
where ideas are engineered
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
