On Thu, Dec 22, 2011 at 2:46 AM, <[email protected]> wrote: > Dear Erick. > > I am trying to use blip working together guruplug - telosb. > > > Just exactly what are you trying to do? >
That is much different than "installing TinyOS onto the GuruPlug". What you are actually doing, and this is directly from the Blip Tutorial, is "Installing an IPv6 Edge router". If you had said that at the outset it would have been much clearer as to what you are trying to do. Do you understand what I am saying? > > > Linux platforms are development stations used to cross compile for the > > tinyos embedded environment. > > > > For example, the telosb is a tinyos platform based on the msp430f1611 > > processor. A development environment such as a mac book pro (x86 mactel > > environment) has a cross compilation set up installed which is used to > > build binaries that get installed onto the telosb. > > > > > So saying installing tinyos on a guruplug is nonsensical. > > > Could you explain me more about you said above. I thought is fundamental > to have a machine (i.e a PC or a Alix Board) to work with the sink mote > (Base Station) in blip or in 6LoWPAN by means a USB communication among > both. Isn't correct this appreciation ? If is correct I need to have > TinyOS installed on GuruPlug to do: # driver/ip-driver /dev/ttyUSB0 telosb > That isn't installing TinyOS on to the GuruPlug. So this is a communications problem. Meaning I don't understand what you are trying to say. What you need to do is simply install the edge route (which Stephen called, driver/ip-driver, after it gets built) on the GuruPlug. While the source code for the edge router (driver/ip-driver) is part of the TinyOS source repository, it technically isn't part of the TinyOS operating system which runs on embedded processors such as the msp430f1611. It was a convenient place to put it. You want to use the GuruPlug as a communications gateway between the Mote IPv6 net and different IPv6 (connected?) network. You will also want to run some form of base station to actually collect the data from the resultant network. That can run either on the GuruPlug or on another node on the net. You don't need to install TinyOS onto the GuruPlug. The only thing you need is the gateway software. You can either compile it on another machine and then install it on the GuruPlug or possibly do everything on the GuruPlug. You mission is to figure out how to build that software. Do it on a reasonable development machine. You will need to at some point be able to compile it for the ARM so you can have the GuruPlug run it. That is left as an exercise for the student. In no way is this "installing TinyOS" onto the GuruPlug. Hopefully this clears up some of the confusion. > > > > > > The guruplug is an ARM based Linux platform. Why on earth would one > want > > to put TinyOS itself onto that platform. > > > > And putting a development environment onto a Plug computer is also > > non-sensical. Why would one want to do that? > > > > > > So what are you trying to do? > > > > I wnat to do something similar to this : > http://www.youtube.com/watch?v=hh3eMSCCpP0&feature=mfu_in_order&list=UL > > But instead to use a Alix Board (To communicate with the sink mote - Blip > purpose) I want to use GuruPlug. > > > > > stanford doesn't really support lenny. It is a partial repository as > > far as I can tell (looks like just avr stuff) > > > Thanks for you answer in advance. > > > > > > > On Wed, Dec 21, 2011 at 9:22 AM, <[email protected]> wrote: > > > >> Please someone have installed Tinyos in a Guruplug? > >> > >> (http://www.globalscaletechnologies.com/t-guruplugdetails.aspx#features > ) > >> It have ARM v5TE Processor? > >> > >> > >> I have trying to install editing /etc/apt/source.list adding: > >> > >> deb http://tinyos.stanford.edu/tinyos/dists/debian/ lenny main > >> > >> But when was updating appear this errors : > >> > >> > >> sheevaplug-debian:~# apt-get update > >> Hit http://hinrg.cs.jhu.edu lenny Release > >> Err http://tinyos.stanford.edu lenny/main Packages > >> 404 Not Found > >> Ign http://hinrg.cs.jhu.edu lenny/main Packages > >> Err http://hinrg.cs.jhu.edu lenny/main Packages > >> 404 Not Found > >> W: Failed to fetch > >> > >> > http://tinyos.stanford.edu/tinyos/dists/debian/dists/lenny/main/binary-armel/Packages > >> 404 Not Found > >> > >> W: Failed to fetch > >> http://hinrg.cs.jhu.edu/tinyos/dists/lenny/main/binary-armel/Packages > >> 404 > >> Not Found > >> > >> E: Some index files failed to download, they have been ignored, or old > >> ones used instead. > >> > >> > >> Please any suggestion will welcome. > >> > >> > >> Thanks in advance. > >> > >> Alejandro. > >> > >> _______________________________________________ > >> Tinyos-help mailing list > >> [email protected] > >> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >> > > > > > > > > -- > > Eric B. Decker > > Senior (over 50 :-) Researcher > > > > > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
