Hi! Some questions: what version of tinyos are you using (latest SVN version should work properly)? Also note that USB MIB boards expose two USB ports (one of them is dedicated for reprogramming).
-- Razvan ME On Mon, 16 Jan 2012, #YONG HUI RU DORANCE# wrote: > Hi all, > I am trying to run Deluge T2 Quick Start. > > > I followed the steps given on: > http://docs.tinyos.net/tinywiki/index.php/Deluge_T2 . > In directory tinyos-2.x/tos/lib/tosboot, > $ make micaz > In directory tinyos-2.x/apps/tests/deluge/Blink, > $ ./burn mib510,/dev/ttyS7 serial@/dev/ttyS7:57600 micaz > > After executing the steps above, I was met with the problem described below: > ========= Upload the image ========== > Flushing the serial port.. > Checking of node is a Deluge T2 base station ... > ERROR: Timeout. Is the node a Deluge T2 base station? > > The same error occurs when I try to carry out the section "Reprogramming a > network > Injecting a new image". > Please assist me on this if you have any idea what the problem could be. > Thank you! > > Regards, > Dorance Yong > > > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
