Hi Antonio, Check the driver hpls in the atm128rfa1 directory (which is only in the svn for now).
Basicly, you should write an McuPowerOverride.lowestState() function which will returns ATM128_POWER_IDLE (or whatever state the PWM needs) if the buzzer is on, and ATM128_POWER_DOWN if not, and call the McuPowerState.update() command if the buzzer turns on or off. Both of them should be wired to McuSleepC. Andris On Mon, Jan 23, 2012 at 5:28 PM, antonio rosa <antoniorosarodrig...@gmail.com> wrote: > Hi to all, > I want to ask if there is another example of how to use the > McuPowerOverride interface than the example that you can find in the > atmega128 timer system. I am using a buzzer and I need the buzzer sounds > during several seconds without interrupts. I can't do it because of the > McuSleepC component sleeps the microcontroler and stops the PWM mode. With > TinyOS-1.x and Moteworks I used the HPLPowermanager enable and disable > commands, but now in TinyOS-2.1.1 there is not these commands.. > > Bests Regards, Antonio Rosa. > > > _______________________________________________ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
