Hi, You are able to show something like leds switching right?
The next step in your demo might be to make a GUI in Java with some buttons like switch on/off the 3 leds on the other mote; another example may be text box in which the user can write a number (0-7) and click a button to send it to the other mote, once it is received then set that number in binary with the leds. To do so you need to get familiar with MIG and serial communication. It is quite straightforward. Check the tutorials and other mails on this list. As a first hint, remember you must create an ActiveMessage for the radio and another one for the serial interface, with both transmitting and receiver in each case, and with specific variables as well. Good luck! Sergio On Thu, Jan 26, 2012 at 9:30 PM, obinna oguejiofor <[email protected]>wrote: > Hi > I bought 6 IEEE802.15.4 Telos b motes from memsic,and i have succeeded in > configuring the motes so that 2 motes can communicate using some commands > found in the quick start guide that came with the sensor kits.My questions > are (1) How can i demonstrate to people that the motes are really > communicating using a graphical interface?, do i need any other application > software to achieve that. (2) If i want to make one of the telos b mote > to become a sink mote, how can i achieve that? > > Thanks > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
