Hi, I am trying to use Deluge with Micaz as per the instructions in the below tutorial,
http://docs.tinyos.net/tinywiki/index.php/Deluge_T2 when I run the command, ./burn mib510,/dev/ttyUSB0 serial@/dev/ttyUSB1:57600 micaz the base station image is installed successfully on micaz mote. but when the image is injected via the serialport I get the below error, =============================== Upload the image =============================== Flushing the serial port.. Checking if node is a Deluge T2 base station ... Pinging node ... ERROR: Unable to retrieve the ident. Connected to Deluge nodes. -------------------------------------------------- Create image: /home/gtcap/local/bin/tos-build-deluge-image -i 1 build/micaz/tos_image.xml Ihex read complete: 35376 bytes starting at 0x0 35376 bytes in 1 sections CRCs: 0x0A82 0x6DBB 0x78D8 0x0D28 0x8F2D 0xBF1A 0x3159 0xF31D 0xBB1F 0xC752 0x5BC2 0x80FE 0x7F45 0x5686 0x9F50 0xD319 0xBD43 0x9C3E 0x26B8 0x2D23 0xDE26 0xC56E 0xE6BF 0x589E 0xE301 0x67FF 0x612C 0x56E5 0x3B13 0x8CB5 0x7047 0x4E84 0xFF62 -------------------------------------------------- ERROR: Unable to erase the flash volume error: 1 data: [] Attempt the workaround for AT45DB... ERROR: Unable to erase the flash volume error: 5 data: [] I tested my serialport with the 'testSerial' app and it is working fine. I have no clue of what is causing the issue. note: I am using tinyos-2.x from sourceforge and I downloaded the latest one -- Regards, Ram
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
