Hi Miklos, I compiled and installed RadioCountToLeds to my motes. There was no output on the screen after running "java net.tinyos.util.DiagMsg -comm serial@/dev/ttyUSB0:57600". I know for a fact that the serial interface is working well because I can see the output of regular printf messages. I tried doing the same with my test application, but got the same result. I checked that the size of both binaries increased after defining -DRADIO_DEBUG in my makefiles.
As you suggested, I also returned RADIO_ALARM_MICROSEC to 1 and RADIO_ALARM_MILLI_EXP to 10 manually. These were the original values, but I had changed them to reflect the most recent update as per the corresponding file in the SVN. Still no luck. Thanks for your help, Sergio On 02/02/2012 05:19 PM, Miklos Maroti wrote: > Hi! > > It looks ok. Are you sure that your TOne clock runs at the right > frequency of 1 MHz? Try setting your RADIO_ALARM_MICROSEC to 1 > manually and RADIO_ALARM_MILLI_EXP to 10 manually as in the > RadioConfig.h. > > Also, before you do anything, compile RadioCountToLeds or your > application with RADIO_DEBUG defined in your makefile (you should > observe that the application gets bigger). Then run this and connect > it to your PC with a serial and on that run > > java net.tinyos.tools.DiagMsg > > This might print out useful information on what is failing in your setup. > > Best, > Miklos > > On Fri, Feb 3, 2012 at 2:10 AM, Sergio Gonzalez<[email protected]> wrote: >> Hi Miklos, >> >> A copy of my RadioConfig.h file is attached. I am not running the latest SVN >> version, but I recently updated the files in both lib/rfxlink and in >> tos/chips/rf2xx/rf230. I wonder whether the problem occurs if my zigbits' >> clocks are uncalibrated. >> >> >> Thanks for your help! >> >> Sergio >> >> >> On 02/02/2012 03:05 PM, Miklos Maroti wrote: >>> Hi Sergio, >>> >>> Can you send us your RadioConfig.h file? Is it the same as that for >>> the IRIS? The two platforms should essentially be completely >>> compatible, so I would like to see what causes the problems. I assume >>> that you are running the latest SVN version. >>> >>> Best, >>> Miklos >>> >> Quoted text from email thread omitted _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
