What platform are you using? if its MicaZ the Ppprouter code is too big to fit in its RAM.
Fernando On Wed, Feb 8, 2012 at 10:05 AM, dwaraka nath <[email protected]>wrote: > Hi.. > > I tried to test BLIP stack by installing PppRouter & UDPEcho (following > http://docs.tinyos.net/tinywiki/index.php/BLIP_2.0_Tutorial) > > whe i tried pppd command > > I got output as > > root@ubuntu:/opt/tinyos/apps/UDPEcho# sudo pppd debug passive noauth > nodetach 115200 /dev/ttyUSB0 nocdtrcts lcp-echo-interval 0 noccp noip ipv6 > ::23,::24 > using channel 11 > Using interface ppp0 > Connect: ppp0 <--> /dev/ttyUSB0 > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x532bf162> <pcomp> > <accomp>] > LCP: timeout sending Config-Requests > > I suspect this is not the desired output of the pppd.. > > Can anyone pls help me in pinging the node with PC. > > thanks in advance.. > > -- > Tulasi Dwarakanath.V > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
