On Tue, Feb 14, 2012 at 4:21 AM, ramakrishna reddy <[email protected] > wrote:
> Hi , This is Ramakrishna, working on tinyos-2.1.1. I am experimenting on > dynamic channel switching for telosb mote. I am trying to send 2 packets > one in 26th channel and second in 11th channel. When i change the channel > from 26 to 11 after sending the first packet in my program, first packet > also being sent on 11th channel but not on 26th. why it is so? I am > modifying the channel only after getting 'sendDone' event of the first > packet. how it is overwriting the channel register with 11 before > transmitting the first packet? Please help me in this regard. > It is my understanding that sendDone gets generated when the last byte has been transfered to the h/w. It doesn't mean that the packet has acutally transmitted. So if you are changing the channel at that point you will probably cause problems for the back part of the packet. I'm not aware of an event being available from the h/w to indicate the complete TX has finished. Not sure if current h/w makes that available.... You will need to stare at the radio docs. You could try putting a delay of somekind to see if that helps. As far as the channel register changing, I have no clue. > -- > With Regards, > RamakrishnaReddy.S > CDAC,Bangalore. > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
