Try this 1. Plug in the device
2. reset it.(press reset for 5 secs) 3. try again it worked for me On Mon, Feb 20, 2012 at 6:44 PM, Imene Boudellioua < [email protected]> wrote: > Dear TinyOS Help team, > > I'm working with TinyOS 2.1.1 and it was working fine but suddenly I got a > problem wile installing programs on Telosb motes that I couldn't find any > solution for in the help archive. I tried different motes with different > programs but kept getting the same error as below: > > $ make telosb install > mkdir -p build/telosb > compiling BlinkAppC to a telosb binary > ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -fnesc-separator=__ > -Wall -Wshadow -Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c > -board= -DDEFINED_TOS_AM_GROUP=0x22 -DIDENT_APPNAME=\"BlinkAppC\" > -DIDENT_USERNAME=\"imene\" -DIDENT_HOSTNAME=\"kw2067\" > -DIDENT_USERHASH=0x2d31e106L -DIDENT_TIMESTAMP=0x4f4246dcL > -DIDENT_UIDHASH=0x161a443aL BlinkAppC.nc -lm > compiled BlinkAppC to build/telosb/main.exe > 2648 bytes in ROM > 54 bytes in RAM > msp430-objcopy --output-target=ihex build/telosb/main.exe > build/telosb/main.ihex > writing TOS image > cp build/telosb/main.ihex build/telosb/main.ihex.out > found mote on /dev/ttyUSB0 (using bsl,auto) > installing telosb binary using bsl > tos-bsl --telosb -c /dev/ttyUSB0 -r -e -I -p build/telosb/main.ihex.out > MSP430 Bootstrap Loader Version: 1.39-telos-8 > Mass Erase... > > An error occoured: > Bootstrap loader synchronization error > make: *** [program] Error 1 > > ====== > > The strange thing that it was working before and I don't understand why it > stopped working. Any help would be appreciated. > > Thank you, > > Imene > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Tulasi Dwarakanath.V
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
