I would aid in our ability to see when problems are occurring and where. Instrumentation.
On Sun, Mar 18, 2012 at 12:28 PM, Oldrine Lewis <[email protected]> wrote: > Hi,**** > > I have a simple test where one node broadcasts packets and it is received > by multiple nodes. I noticed that I was occassionally receiving some > corrupted packets. The packets were transmitted correctly because one of > the other nodes received the packet correctly. **** > > On doing a little investigation, I noticed that the lower layer driver > (RF230DriverHwAckP.nc) does not check the RX_CRC_VALID flag in the > register PHY_RSSI (0x06) which is updated with the result of the FCS check > on the received packet. **** > > ** ** > > Would adding another check improve the Receiver reliability?**** > > ** ** > > Thanks,**** > > Lewis**** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
