Hi all, I am using MICA2 motes (433MHz) with Tinyos-1.x. I am interested in increasing the data rate as more as possible. If the reading I have done has been worth I have understood that the standard baud rate is 38.4K that becames 19.4Kb/s after the Manchester encoding (2 chips -> 1 bit.). The standard preamble is set in the MODEM1 - SETTLING register and the default value set in the CC1000ControlM file is 11 that according to the Chipcon-CC1000 datasheet corresponds to 98 chips, is it correct? I am trying to transmit continuously for 1 second and I receive 15 packets. Considering that every packet is 36 bytes of Tos_Msg + (98/2)=49bit of preamble the datarate I am achieving is about 5.040 Kb/s, far from the nominal 19.4 Kb/s. Could someone clear me the point? Thanks, Giacomo _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
