Note that the LOTUS uses a LPC1758. You would have to write all the peripheral drivers for it in TinyOS, as that hasn't been done yet. So I think Janos' estimate of one man-month is low, unless you really know what you do.
- Thomas -- Assistant Professor Electrical and Computer Engineering University of Utah, Salt Lake City On Thu, May 10, 2012 at 8:28 AM, Janos Sallai <[email protected]> wrote: > As far as I can tell, it's a completely new platform. I would guess > that the code exists in the main tree for most of the hardware > components, though setting up platform support for the LOTUS in tinyos > is still a nontrivial task -- at least one man-month of work. Maybe a > bit more if the board schematics are not publicly available. > > Janos > > On Thu, May 10, 2012 at 5:46 AM, David Rodenas <[email protected]> wrote: >> Hi all >> >> I am interested in lotus devices manufactured by MEMSIC Inc. However, I've >> seen that there is not support for TinyOS. Am I wrong? Is anyone working >> with these devices? Would it be a bad investment? They are fully compatible >> with Imote2, but I suppose Imote2's drivers would't work on Lotus. >> >> All the help/opinions/suggestions are appreciated. >> >> Thanks! >> >> David >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
