I am assuming that you are using the Tinynode 584, in that case the
XE1205PhyRssiConfP component in tos/chips/xe1205/conf provides the
XE1205PhyConf interface that has the setRFPower command. You can also
set the bitrate (the slower is the bitrate, the longer distance you can
reach) and check that the transceiver frequency matches the one of your
tinynode (I have a 915Mhz version, I think the default one is 868Mhz,
but again, check it in the code). With slow bitrate, highest tx power
and correct frequency I've been able to reach ~600 meters outdoor and
60-70 meters indoor.
Regards,
Ugo
On 05/29/2012 08:05 PM, Luis Alejandro Navarro Mollejas wrote:
Hi:
Do anyone know how can I do to set the transmission power of the
Tinynodes?
I need a communication in 50 meters, but they don't work in more than
1 meter.
Thank you.
Regards,
Luis
--
Luis Alejandro Navarro Mollejas.
Estudiante de la Universidad Simón Bolívar.
Correo Alternativo: [email protected]
<mailto:[email protected]>
Teléfono: +584265579497
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Ugo Maria Colesanti
Dipartimento di Informatica e Sistemistica
Sapienza Universita' di Roma
Via Ariosto 25, II floor, room B221
00185, Rome
http://wiserver.dis.uniroma1.it/cms/index.php?id=8
Phone: +39 06 77274003
Fax: +39 06 77274002
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
