Hello, I've been able to somewhat reduce the power consumed by an ATM1281-based Zigbit device by switching off the radio and the UART port (via SerialActiveMessageC) during periods of inactivity, but I've been unable to get below 0.4 mA. I tried to explicitly disable the I2C bus as well as, but there was no change. The corresponding fuses for the watchdog timer, the brownout detector and the on-chip debugger are already (un)programmed. I also tried lowering the MCU's clock frequency, but anything other than 8 Mhz won't compile. Stopping the ADC converter does not seem to make any difference either. Has anybody had better luck with an Iris, Meshbean, or any other device with the ATM1281/RF230 combo?
Thanks, Sergio _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
