Can you please be a little bit more specific. Trying to decifer what you are saying isn't working.
I've done a lot of work with the msp430 family so can probably help you but not from your description. zigbee is a radio protocol so what are you taling about with regards to sampling? <goog_830844082> On Fri, Sep 7, 2012 at 7:09 PM, Baidoo-Williams, Henry E < <goog_830844082> [email protected]> wrote: > Hello , <goog_830844082> > > I am working on zigbee communiction between telosb and usrp. I realise > that I can receive at the usrp end only if I set the sampling rate to 4MHz > even though the bandwith of the data is less than 100KHz. After searching > for a long time, I have realised the issue has to do with the DCO clock > which is set to 4MHz. <goog_830844082> > > Does any one know how to reduce this setting using CFLAGS on tinyos or > perhaps changing some other settings? Any help would be > appreciated.<goog_830844082> > > <goog_830844082> > > Respectfully, <goog_830844082> > > H. E. Baidoo-Williams, <goog_830844082> > > GRA, University of Iowa <goog_830844082> > > <goog_830844082> > > ______________________________ <goog_830844082>_________________ > Tinyos-help mailing list > [email protected] <goog_830844082> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
