Hi,every one.I am a chinese student.
I have a problem with mib520 as mentioned above.
when I plug the mib520 to my computer, from the /var/log/messages file,it says:
Oct 8 05:56:01 localhost kernel: ftdi_sio 2-2.1:1.1: FTDI USB Serial
Device converter detected
Oct 8 05:56:01 localhost kernel: drivers/usb/serial/ftdi_sio.c:
Detected FT2232C
Oct 8 05:56:01 localhost kernel: usb 2-2.1: FTDI USB Serial Device
converter now attached to ttyUSB1
Oct 8 05:56:01 localhost kernel: usbcore: registered new driver ftdi_sio
Oct 8 05:56:01 localhost kernel: drivers/usb/serial/ftdi_sio.c:
v1.4.3:USB FTDI Serial Converters Driver
then I enter the Blink diretory,and use the command:
the result is as follow:
[root@localhost Blink]# make micaz install mib520,/dev/ttyUSB1
mkdir -p build/micaz
compiling BlinkAppC to a micaz binary
ncc -o build/micaz/main.exe -Os -fnesc-separator=__ -Wall -Wshadow
-Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb
-DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
-DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"root\"
-DIDENT_HOSTNAME=\"localhost.local\" -DIDENT_USERHASH=0x53b81074L
-DIDENT_TIMESTAMP=0x5072cf6dL -DIDENT_UIDHASH=0x897f034dL
-fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())'
-fnesc-dump='referenced(interfacedefs, components)'
-fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/micaz/main.exe
2052 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
writing TOS image
cp build/micaz/main.srec build/micaz/main.srec.out
installing micaz binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyUSB1 --wr_fuse_h=0xd9
-dpart=ATmega128 --wr_fuse_e=ff --erase --upload
if=build/micaz/main.srec.out --verify
Programmer is not responding.
make: *** [program] Error 2
I have try this a few times ,however with same results.
I wonder what the problem is,Because I use "make micaz install mib520 "
but the process shows that
"installing micaz binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyUSB1 "
I try to google the problem,However I can not find useful information
because of the GFW.Damn it.
I am desperate to know how to solve this problem.
Thanks a lot.
--
Gu Ning
Graduate School at Shenzhen, Tsinghua University
Room H205, Building H
Tsinghua Campus, The University Town, Shenzhen, P.R.China 518055
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
