I use the mib520 programming board to copy BaseStation application on the
mote, but there is errors is outputed. And I realise the it is using mib510
programing mode to copy the application,then it caused the fimal errors.
the output is as below:
mkdir -p build/micaz
compiling BaseStationC to a micaz binary
ncc -o build/micaz/main.exe -Os -Wall -Wshadow -Wnesc-all -target=micaz
-fnesc-cfile=build/micaz/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22
--param max-inline-insns-single=100000 -DCC2420_NO_ACKNOWLEDGEMENTS
-DCC2420_NO_ADDRESS_RECOGNITION -DIDENT_APPNAME=\"BaseStationC\"
-DIDENT_USERNAME=\"Administrator\" -DIDENT_HOSTNAME=\"WSDBR26YNRC6KJU\"
-DIDENT_USERHASH=0x0b1cbe93L -DIDENT_TIMESTAMP=0x507d625dL
-DIDENT_UIDHASH=0x41d0a2e1L -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())'
-fnesc-dump='referenced(interfacedefs, components)'
-fnesc-dumpfile=build/micaz/wiring-check.xml BaseStationC.nc -lm
/opt/tinyos-2.x/tos/chips/cc2420/lpl/DummyLplC.nc:39:2: warning: #warning
"*** LOW POWER COMMUNICATIONS DISABLED ***"
compiled BaseStationC to build/micaz/main.exe
14940 bytes in ROM
1724 bytes in RAM
avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
writing TOS image
tos-set-symbols build/micaz/main.srec build/micaz/main.srec.out-0
TOS_NODE_ID=0 ActiveMessageAddressC$addr=0
installing micaz binary using mib510
uisp -dprog=mib510 -dserial=com3 --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out-0 --verify
Please use /dev/ttyS2 rather than com3 (the latter often doesn't work)
Firmware Version: .
Failed to enter programming mode.
/opt/tinyos-2.x/support/make/avr/mib510.extra:28: recipe for target
`program' failed
make: *** [program] Error 2
I am in urgent need for the anwser, so hope your help!
Thanks very much !
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
