On Wed, Oct 24, 2012 at 1:20 AM, Sarah John Mwariti <[email protected]>wrote:
> Hi Eric, > > Thank you so much for the reply.......i understand that i have to learn > how to do it on my own. > > But was hoping to get the direction of where to read on TELOSB > Bidirectional Communication. > Okay. So you have PC <------> BaseStation <-----> Mote1 <-------> Mote2 PC <--> BaseStation is serial BaseStation <----> Mote1 and Mote1 <----> Mote2 Radio Serial communications between PC and BaseStation is talked about in http://docs.tinyos.net/tinywiki/index.php/Mote-PC_serial_communication_and_SerialForwarder Radio communications between the motes is described in http://docs.tinyos.net/tinywiki/index.php/Mote-mote_radio_communication These documents describe all the interfaces and the basics of communication using the different h/w paths. So I'm confused as to what kind of documentation of TELOSB Bidirectional Communication you are looking for? > > Thanks > Sara. > > > > > On Wed, Oct 24, 2012 at 9:11 AM, Eric Decker <[email protected]> wrote: > >> Hi Sara, >> >> Not sure what you are asking. Not clear at all. >> >> >> On Wed, Oct 24, 2012 at 12:06 AM, Sarah John Mwariti < >> [email protected]> wrote: >> >>> Hi guys, >>> >>> in need of some help with bi-directional communication between two >>> motes, or a document that i can use. I have gone through the mote-mote >>> communication tutorial, and it works fine >>> >> >> Okay. >> >> If you need to understand how it works, I'd recommend getting a JTAG >> debugger and stepping into the code to see how it works. >> >> >>> I want to have a BaseStation sending data to a mote then after 1muntes >>> then the mote forward the data to the other mote and back to the mote it >>> got the data from. >>> >> >> Okay. >> >> >>> >>> Basically there is a BS and two sensor nodes: BS sending to one sensor >>> node then the sensor node forward the data to the other sensor node. The >>> sensor node send back the dat to the sensor node it received the data from. >>> >> >> Okay. So what are you asking? >> >> How to do it? >> >> You need to figure that out. That's where the learning happens. If >> you expect someone to tell you how to do it, well there isn't much you will >> learn if someone just gives you the answer. And besides, most folks are >> busy and don't have time to write your program for you. >> >> So dig in and figure it out. >> >> >> >>> >>> >>> Hope ill get reply soon. >>> >>> >>> Regards >>> Sara. >> >> >> >> >> -- >> Eric B. Decker >> Senior (over 50 :-) Researcher >> >> >> > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
