Hi all
I am getting the following error on TinyOS-2.1.2 (installed on Ubuntu 12.04)
when I try to install any app on MicaZ. For example, with Blink:
---$ make micaz install mib520,/dev/ttyUSB0mkdir -p build/micaz compiling
BlinkAppC to a micaz binaryncc -o build/micaz/main.exe -Os -fnesc-separator=__
-Wall -Wshadow -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c
-board=micasb -DDEFINED_TOS_AM_GROUP=0x22 --param
max-inline-insns-single=100000 -DIDENT_APPNAME=\"BlinkAppC\"
-DIDENT_USERNAME=\"user\" -DIDENT_HOSTNAME=\"user-vbox\"
-DIDENT_USERHASH=0x41040a3eL -DIDENT_TIMESTAMP=0x508e415dL
-DIDENT_UIDHASH=0xfb0b11caL -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/micaz/main.exe 2044 bytes in ROM
51 bytes in RAMavr-objcopy --output-target=srec build/micaz/main.exe
build/micaz/main.srecavr-objcopy --output-target=ihex build/micaz/main.exe
build/micaz/main.ihex writing TOS imagecp build/micaz/main.srec
build/micaz/main.srec.out installing micaz binary using mib510uisp
-dprog=mib510 -dserial=/dev/ttyUSB0 --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out --verifymake:
uisp: Command not foundmake: *** [program] Error 127---
Any idea? All the help possible is appreciated.
Regards,
David
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
