Hi everyone, I cannot reprogram my TelosB motes after I accidentally configure RST/NMI pin in NMI mode as mentioned in the previous thread<http://www.mail-archive.com/[email protected]/msg42406.html>. I'm trying one approach here<http://e2e.ti.com/support/microcontrollers/msp43016-bit_ultra-low_power_mcus/f/166/t/198966.aspx>to recover them, which requires that TelosB's pin BSLTX and BSLRX (i.e., pin P1.1 and P2.2) to be connected to P1.6 and P1.7 of MSP430 LaunchPad<http://processors.wiki.ti.com/index.php/MSP430_LaunchPad_%28MSP-EXP430G2%29>, respectively. However, from the schematic<http://webs.cs.berkeley.edu/tos/hardware/telos/telos-revb-2004-09-27.pdf>, both pins are neither exposed through expansion connectors nor JTAG. Rather, they are connected to I/O buffer. Is there anyway to achieve the connection between them and the corresponding pins on the LaunchPad? More information can be found in this thread<http://e2e.ti.com/support/microcontrollers/msp43016-bit_ultra-low_power_mcus/f/166/p/191579/793553.aspx#793553> .
Any help would be truly appreciated. Best regards, -Xiaohui Liu
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
