Hi Saurabh, You probably didn't select the correct programmer in the make command. You most likely used a command like this: make iris install However, you should use make iris install mib520,<the serial port provided by mib520>. mib520 provides two serial ports, usually the first one is the programming port, the second is for communication, but it can be the opposite, it depends on your driver.
Andras Biro Unicomp Ltd. http://ucmote.com On Thu, Dec 27, 2012 at 3:28 PM, Saurabh Suradhaniwar < [email protected]> wrote: > Hello All, > I am using Tinyos 2.1.2 and MIB520 programming board with IRIS > motes. When I am trying to deploy application developed in tinyos 2.1.2, I > get the following error message: > > avrdude: can't open device "/dev/parport0": No such file or > directory > avrdude: failed to open parallel port "/dev/parport0" > > Please help. > > -- > Thanks and Regards > Saurabh Suradhaniwar > M.Tech (Advanced Networks) > ABV-IIITM-Gwalior, > Mob: +919584215313 > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
