Hi,
I am new to TinyOS and implementing the tutorials. I am on Deluge T2 at the
moment.
When I run the command
./burn serial@/dev/ttyUSB0:115200 telosb
I get the following error
xubuntos@xubuntos-tinyos:/opt/tinyos-2.x/apps/tests/deluge/Blink$ ./burn
serial@/dev/ttyUSB0:115200 telosb
rm -rf build
rm: cannot remove `build/telosb/ident_flags.txt': Permission denied
rm: cannot remove `build/telosb/StorageVolumes.h': Permission denied
make: *** [clean] Error 1
============================ Compile and load Blink
============================
mkdir -p build/telosb
/bin/sh: cannot create build/telosb/ident_flags.txt: Permission denied
make: *** [ident_cache] Error 2
+-------------------------------------------------------+
| |
| At this point the first led (red) should be blinking. |
| |
| Press ENTER to continue... |
| |
+-------------------------------------------------------+
============================= Compile a new Blink
==============================
mkdir -p build/telosb
/bin/sh: cannot create build/telosb/ident_flags.txt: Permission denied
make: *** [ident_cache] Error 2
=============================== Upload the image
===============================
ERROR: Unable to initialize serial port connection to serial@
/dev/ttyUSB0:115200
+----------------------------------------------------------------+
| |
| In the next step the following things will take place: |
| - the mote will be rebooted |
| - all the leds will blink for some time as the |
| reprogramming by tosboot takes place. |
| - a fading of the leds will indicate the exiting from tosboot. |
| - the mote should start blinking the 3rd led (blue/yellow). |
| |
| Press ENTER to continue... |
| |
+----------------------------------------------------------------+
Then I get root permission by su and get the following error
root@xubuntos-tinyos:/opt/tinyos-2.x/apps/tests/deluge/Blink# ./burn
serial@/dev/ttyUSB0:115200
telosb
rm -rf build
rm -rf _TOSSIMmodule.so TOSSIM.pyc TOSSIM.py
============================ Compile and load Blink
============================
mkdir -p build/telosb
tos-storage-stm25p /opt/tinyos-2.x/tos/platforms/telosb <volumes-stm25p.xml
>build/telosb/StorageVolumes.h || rm -f build/telosb/StorageVolumes.h
compiling BlinkAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow
-DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=telosb
-fnesc-cfile=build/telosb/app.c -board= -Ibuild/telosb -DDELUGE_BASESTATION
-DDELUGE_BASESTATION -DDELUGE -I/opt/tinyos-2.x/tos/lib/net
-I/opt/tinyos-2.x/tos/lib/net/Deluge
-I/opt/tinyos-2.x/tos/lib/net/Deluge/FlashVolumeManager
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/msp430
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telos
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telosb
-Wl,--section-start=.text=0x4a00,--defsym=_reset_vector__=0x4000
-DIDENT_PROGRAM_NAME=\"BlinkAppC\" -DIDENT_USER_ID=\"root\"
-DIDENT_HOSTNAME=\"xubuntos-tinyos\" -DIDENT_USER_HASH=0x79e6532eL
-DIDENT_UNIX_TIME=0x511bcd9bL -DIDENT_UID_HASH=0x53048be2L BlinkAppC.nc
-lm
Couldn't execute msp430-gcc
make: *** [exe0] Error 2
+-------------------------------------------------------+
| |
| At this point the first led (red) should be blinking. |
| |
| Press ENTER to continue... |
| |
+-------------------------------------------------------+
============================= Compile a new Blink
==============================
mkdir -p build/telosb
compiling BlinkAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow
-DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=telosb
-fnesc-cfile=build/telosb/app.c -board= -Ibuild/telosb -DBLINK_REVERSE
-DDELUGE_BASESTATION -DDELUGE_BASESTATION -DDELUGE
-I/opt/tinyos-2.x/tos/lib/net -I/opt/tinyos-2.x/tos/lib/net/Deluge
-I/opt/tinyos-2.x/tos/lib/net/Deluge/FlashVolumeManager
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/msp430
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telos
-I/opt/tinyos-2.x/tos/lib/net/Deluge/extra/telosb
-Wl,--section-start=.text=0x4a00,--defsym=_reset_vector__=0x4000
-DIDENT_PROGRAM_NAME=\"BlinkAppC\" -DIDENT_USER_ID=\"root\"
-DIDENT_HOSTNAME=\"xubuntos-tinyos\" -DIDENT_USER_HASH=0x79e6532eL
-DIDENT_UNIX_TIME=0x511bcd9fL -DIDENT_UID_HASH=0x56d91199L BlinkAppC.nc
-lm
Couldn't execute msp430-gcc
make: *** [exe0] Error 2
=============================== Upload the image
===============================
ERROR: Unable to initialize serial port connection to serial@
/dev/ttyUSB0:115200
+----------------------------------------------------------------+
| |
| In the next step the following things will take place: |
| - the mote will be rebooted |
| - all the leds will blink for some time as the |
| reprogramming by tosboot takes place. |
| - a fading of the leds will indicate the exiting from tosboot. |
| - the mote should start blinking the 3rd led (blue/yellow). |
| |
| Press ENTER to continue... |
| |
+----------------------------------------------------------------+
I previously able to run this without errors but don't know what's wrong
now.
Your help will be much appreciated on the error "Couldn't execute
msp430-gcc" error. msp430-gss exe is present in its folder.
--
----------------------------------
Regards,
*Muhammad Tayyeb*
10mscsemtay...@seecs.edu.pk*
*
_______________________________________________
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
