Hi Christian, Just copy the ucmini platform, and strip everything off you do not need :). Creating a platform is not documented, but it is not that hard. You should look for the commit in the git history where the ucmini platform was added to tinyos-main. There you will see everything you need to create for a new platform.
Best, Miklos On Wed, Apr 3, 2013 at 9:22 AM, Christian Renner < [email protected]> wrote: > Dear all, > > I have been using the Iris platform for quite a while and am about to > switch to deRFmega modules (see the link below). They come with an > ATmega128RFA1 (or ATmega256RFR2 as an alternative) and an antenna. > > I've seen that the UCmini node uses the same MCU (but ships with > additional sensors). The question now is: How do I put together a new > node platfrom for TinyOS with the mentioned MCU? (At a later point, I > plan on adding sensors, LEDs, and an energy-harvesting power supply). > > > Thanks in advance > Christian > > > > > http://www.dresden-elektronik.de/funktechnik/products/radio-modules/oem-derfmega/description/?L=1&cHash=c9c902ccdb43164696acccf81b62b2bd > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
