The MDA300CA that Bipin mentions in its data sheet that the ADC inputs are 0-2.5 V so don't know if that works for your application.
The telosb has a few ADC ports brought out to the expansion connector at U2. I beleive you can use those for 0-3V. you should look at the manual for the msp430f1611 mcu. On Tue, Dec 3, 2013 at 12:04 AM, Alaios <[email protected]> wrote: > Dear all, > I am practicing on connecting external sensors on a telosb or micaz > sensors and I need a bit of your experience. > > One of the sensors I found on the market, that I would like to try, can > work with 3Vdc (which I think is supported by telosb). > > The pressure reading would be returned of voltage values ranging from 0 to > 3 Volts. > Which are the interfaces that can "understand" voltage values? > > I would like to thank you in advance for your reply > > Regards > Alex > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
