Dear All, I was trying to run the example CoapBlipC in apps directory but I am facing the error "StorageVolumes.h" not created. After looking at the net I got to know that tos-storage-at45db command will create the header file. But where do I put this command and how (in the makefile or somewhere else). Could any body help me out. I have shown the output after running the application in eclipse yeti2. Same error is received on the shell. set: TOSROOT = /opt/tinyos-2.1.2 set: TOSDIR = /opt/tinyos-2.1.2/tos set: ECLIPSE_PROJECT = /home/xubuntos/workspacenew/Pcoap set: PFLAGS = \"-I/home/xubuntos/workspacenew/Pcoap/src\" set: MAKERULES = /opt/tinyos-2.1.2/support/make/Makerules set: COMPONENT = /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC make: Entering directory `/home/xubuntos/workspacenew/Pcoap' mkdir -p build/micaz compiling /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC to a micaz binary ncc -o build/micaz/main.exe -Os "-I/home/xubuntos/workspacenew/Pcoap/src" -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 -DIDENT_APPNAME=\"/home/xubuntos/\" -DIDENT_USERNAME=\"xubuntos\" -DIDENT_HOSTNAME=\"xubuntos-tinyos\" -DIDENT_USERHASH=0x00f95284L -DIDENT_TIMESTAMP=0x52b6d7bbL -DIDENT_UIDHASH=0xb6f3c0a1L -fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs, components)' -fnesc-dumpfile=build/micaz/wiring-check.xml /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc -lm make: Leaving directory `/home/xubuntos/workspacenew/Pcoap' /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:33:28: error: StorageVolumes.h: No such file or directory /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:34:32: error: lib6lowpan/6lowpan.h: No such file or directory In file included from /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:35: /home/xubuntos/workspacenew/Pcoap/src/tinyos_coap_resources.h:36:17: error: pdu.h: No such file or directory In file included from /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:35: /home/xubuntos/workspacenew/Pcoap/src/tinyos_coap_resources.h:45: `MAX_URI_LENGTH' undeclared here (not in a function) /home/xubuntos/workspacenew/Pcoap/src/tinyos_coap_resources.h:45: size of array `uri' has non-integer type /home/xubuntos/workspacenew/Pcoap/src/tinyos_coap_resources.h:101: `NUM_URIS' undeclared here (not in a function) /home/xubuntos/workspacenew/Pcoap/src/tinyos_coap_resources.h:101: size of array `uri_key_map' has non-integer type /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc:33:24: error: IPDispatch.h: No such file or directory /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc:34:35: error: lib6lowpan/lib6lowpan.h: No such file or directory /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc:35:27: error: lib6lowpan/ip.h: No such file or directory /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc:36:25: error: blip_printf.h: No such file or directory In file included from /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:45: In component `CoapBlipP': /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc: In function `Boot.booted': /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc:76: implicit declaration of function `printf' /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc: In function `RadioControl.startDone': /home/xubuntos/workspacenew/Pcoap/src/CoapBlipP.nc:105: implicit declaration of function `printf' In component `CoapBlipC': /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc: At top level: /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:46: component LibCoapAdapterC not found /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:47: component IPStackC not found /home/xubuntos/workspacenew/Pcoap/src/CoapBlipC.nc:51: no match make: *** [exe0] Error 1 finished (exit code: '2', took: 00:05.848) Thanks Vandana Bhasin
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
