What kind of sensorboard are you using?
MTS310? Light sensor is just a resistance varies by light.
MTS400? sensor data unit is lux.
Best regards.
在 2014-04-14 01:29:08，"Akansha Chitransh" <[email protected]> 写道：
can any one tell me , what is the unit of light intensity values recorded from
micaz motes???
On Sat, Apr 12, 2014 at 9:02 PM, mmz_tinyos <[email protected]> wrote:
Hi,
First of all, you should make sure telosb is connected to VM, not host OS, use
"VM -> Removable Devices".
If connected, you can use "ls /dev | grep USB" to see if telosb is recognized,
motelist does not work well under linux.
Best regards.
At 2014-04-12 16:18:51,"Kumar Arun" <[email protected]> wrote:
Dear all,
In my institution, we have 20 Telosb motes.
In which one of the mote is showing no response when motelist typed. So could
not able to program the mote further.
I am using VMware, and there is no signal of USB connection too when the mote
is connected, but it gets powered from USB port and already some one programmed
Blinking, there is only display of light with that mote .
While with rest 19 motes all are fine.
Please guide,
Thanks!!
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
"life is colorful"
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
