We're currently using an STM32F373CC [1] on our router/gateway nodes, running a very minimal TinyOS port (just GPIO, timer, UART and SPI, no low power modes or ADCs yet). Quite nice to work with so far, and excellent bang for the buck compared to the big MSP430s if the power consumption is no issue. Kind regards, Michiel
[1] http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1576/LN10/PF253090 > -----Original Message----- > From: [email protected] [mailto:tinyos-help- > [email protected]] On Behalf Of Philip Levis > Sent: Wednesday, April 23, 2014 18:41 > To: Thomas Schmid > Cc: Tinyos-Help > Subject: Re: [Tinyos-help] TinyOS support for Atmel chips on newer > ZigBit modules (ATZB) > > On Apr 23, 2014, at 7:26 AM, Thomas Schmid <[email protected]> > wrote: > > > It really is all about writing drivers for those chips. The port for > the SAM3U and SAM3S are pretty good, though they lack a little bit in > low-power features (e.g. turning peripherals properly on and off). > > I'm definitely interested to hear what Cortex M chips people are > using/want to use, to see if it's possible to do reasonable chip- > independent implementations. I've poked around at the SAM3 code but > haven't looked at other chip data sheets to have a sense of how > much/what differs, if at all. > > Phil > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos- > help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
