Calculate the clock cycles per jiffy (32kHz ticks), configure I/O pins as input/output.
Phil > On Nov 6, 2014, at 4:57 AM, He Dajiang (I2R) <[email protected]> wrote: > > Hi all, > > We've made sensor board based on micaz architecture. The board does not work > even for the simple Blink application; we managed to flash firmware into the > board by using tinyos make tools (make micaz reinstall.x ...). > However, if we bypass tinyos and flash simple blinking code into the board > (SET and CLEAR the MCU pins linking to the led), it can function and hardare > leds blink. I take a look at app.c of tinyos blink app, before Blink__booted > function is called, there are some other hardware, platform, and software > init functions being called. Can I ask questions to the creators of tinyos, > what are the checkings tinyos does when booting up? I guess some of the > checkings failed on my board so that tinyos Blink app does not run in my > board. > > Thx & Regards > dajiang > > Institute for Infocomm Research disclaimer: "This email is confidential and > may be privileged. If you are not the intended recipient, please delete it > and notify us immediately. Please do not copy or use it for any purpose, or > disclose its contents to any other person. Thank you." > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
