Thanks. I have tried the testbeds. Here I am just seeking a way to run LPL in TOSSIM since I have seen people doing it.
On Thu, Oct 5, 2017 at 12:38 PM, Bradbury, Matthew <m.bradb...@warwick.ac.uk > wrote: > That is also a problem I've encountered with those tools. The alternative > is to just deploy on a testbed. I recommend flocklab or fit iotlab. > > Matthew > > From: Xiaoyang Zhong > Sent: Thursday, 5 October, 17:01 > Subject: Re: How to simulate LPL in TOSSIM > To: Matthew Bradbury > Cc: Tinyos-help > > > Thanks for your suggestion Matthew. > > With Avrora or Cooja I encounter problems about emulating large size > networks (e.g., more than 100 nodes). It was too slow and took too much > memory. > > On Thu, Oct 5, 2017 at 4:43 AM, Matthew Bradbury <matt-bradb...@live.co.uk> > wrote: > > On 04/10/2017 20:47, Xiaoyang Zhong wrote: > > Dear all, > > > > As far as I know that low power listening is not officially supported in > > TOSSIM. However, I have read several recent papers that simulation in > > TOSSIM with low power listening, such as [1]. Does anyone mind to share > > your approach of doing this? > > > > Thank you very much for your time! > > > > [1] Tele Adjusting: Using Path Coding and Opportunistic Forwarding for > > Remote Control in WSNs > > > > Regards, > > Xiaoyang > > > > > > > > > > Have a look at Avrora or Cooja both are cycle accurate simulators that > take a binary and run it. This means that the TinyOS LPL code will be run. > > > > > >
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
