This bug was fixed in the package jasper-initramfs - 0.25
---------------
jasper-initramfs (0.25) maverick; urgency=low
* make sure we use the right partition for booting when running from SD on
OMAP4 blaze (LP: #640406)
-- Oliver Grawert <[email protected]> Thu, 16 Sep 2010 18:27:07 +0200
** Changed in: jasper-initramfs (Ubuntu)
Status: Confirmed => Fix Released
--
Flashing OMAP4 kernel uses the wrong partition on Blaze
https://bugs.launchpad.net/bugs/640406
You received this bug notification because you are a member of TI OMAP
Developers, which is a direct subscriber.
Status in “jasper-initramfs” package in Ubuntu: Fix Released
Bug description:
When flash_kernel runs on blaze, it flashes in /dev/mmcblk0p1 (as per
flash_kernel.conf). however on blaze mmcblk0 is the device name for the eMMC,
not the SD card.
also in the image, the initial boot.scr has mmcblk0 hard coded, so it needs to
be documented that this must be changed when booted on blaze.
blaze and panda are different machines at kernel level. on blaze /proc/cpuinfo
contains:L
$ cat /proc/cpuinfo
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
<snip>
Hardware : OMAP4430 4430SDP board
Revision : 0010
Serial : 0000000000000000
_______________________________________________
Mailing list: https://launchpad.net/~tiomap-dev
Post to : [email protected]
Unsubscribe : https://launchpad.net/~tiomap-dev
More help : https://help.launchpad.net/ListHelp
