** Also affects: jasper-initramfs (Ubuntu Maverick)
Importance: Undecided
Status: New
** Changed in: jasper-initramfs (Ubuntu Maverick)
Assignee: (unassigned) => Oliver Grawert (ogra)
** Changed in: jasper-initramfs (Ubuntu Maverick)
Milestone: None => ubuntu-10.10
** Changed in: jasper-initramfs (Ubuntu Maverick)
Importance: Undecided => High
** Changed in: jasper-initramfs (Ubuntu Maverick)
Status: New => Fix Committed
--
SD card pre-installed image issue on OMAP4 Blaze board
https://bugs.launchpad.net/bugs/652143
You received this bug notification because you are a member of TI OMAP
Developers, which is a direct subscriber.
Status in “jasper-initramfs” package in Ubuntu: Fix Committed
Status in “jasper-initramfs” source package in Maverick: Fix Committed
Bug description:
Hi,
I downloaded the 20100928 pre-installed Maverick image for OMAP4 to install it
on my OMAP4430 Blaze board, and flashed it on an SD card.
I had to modify the MLO and u-boot.bin files in the FAT partition to support
this board, but this was expected. I also replaced "root=/dev/mmcblk0p2" by
"root=/dev/mmcblk1p2" to boot on the SD card (/dev/mmcblk0 corresponds to the
eMMC on the Blaze board).
The board booted, and your scripts resized the second SD card partition to fill
the whole available space. Then the system rebooted.
I checked the updated boot.scr script and the bootargs contained:
root=LABEL=emmcroot
emmcroot is the label of the ext3 filesystem on /dev/mmcblk0p2 (the eMMC
already had its own partitions and filesystems).
This is wrong because I wanted to install Maverick on the SD card. It seems
that your scripts took the label of /dev/mmcblk0p2 as it would have done on the
Panda board. Could it instead take the label from the filesystem on the
partition specified at the initial boot (root=/dev/mmcblk1p2 in my case)?
Any other ideas?
Thank you in advance,
Cheers,
Michael.
_______________________________________________
Mailing list: https://launchpad.net/~tiomap-dev
Post to : [email protected]
Unsubscribe : https://launchpad.net/~tiomap-dev
More help : https://help.launchpad.net/ListHelp
