On suspend: [ 2051.478332] wl1271: down [ 2053.661895] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro,commit=0 [ 2054.696990] omaplfb: omaplfb_Ioctl: PVR Device 1: Leave VT [ 2054.939666] PM: Syncing filesystems ... done. [ 2054.968749] PM: Preparing system for mem sleep [ 2054.973815] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 2055.004486] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done. [ 2055.035675] PM: Entering mem sleep [ 2055.039245] Suspending console(s) (use no_console_suspend to debug) [ 2055.349029] PM: suspend of devices complete after 301.818 msecs [ 2055.352752] omap_device: omapdrm_pvr.0: new worst case deactivate latency 0: 2655029 [ 2055.355468] omap_device: omap-mailbox.-1: new worst case deactivate latency 0: 2655029 [ 2055.363555] PM: late suspend of devices complete after 14.495 msecs [ 2055.363647] Disabling non-boot CPUs ... [ 2055.364868] CPU1: shutdown
On resume: [ 4100.153625] Enabling non-boot CPUs ... [ 4100.190093] CPU1: Booted secondary processor [ 4100.190399] CPU1: Unknown IPI message 0x1 [ 4100.190429] Calibrating delay loop (skipped) already calibrated this CPU [ 4100.191223] thermal_cooling_dev_register:Found cpu cpu [ 4100.191223] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=eeb88d20, cooling=c0af70c4 [ 4100.191223] CPU1 is up [ 4100.194335] Switched to NOHz mode on CPU #1 [ 4100.346130] omap_device: omapdss_dss.-1: new worst case activate latency 0: 5584716 [ 4100.346923] omap_device: smartreflex.2: new worst case activate latency 0: 640869 [ 4100.347015] PM: early resume of devices complete after 155.731 msecs [ 4100.759460] PM: resume of devices complete after 412.048 msecs [ 4100.870178] PM: Finishing wakeup. [ 4100.873779] Restarting tasks ... done. [ 4101.095642] omaplfb: omaplfb_Ioctl: PVR Device 1: Enter VT [ 4101.684356] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro,commit=0 [ 4102.709991] wl1271: firmware booted (Rev 6.1.5.50.74) [ 4102.738555] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4102.924072] ieee80211 phy0: device no longer idle - scanning [ 4104.917266] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, half-duplex, lpa 0x0080 [ 4105.598846] ieee80211 phy0: device now idle [ 4113.422607] eth0: no IPv6 routers present [ 4122.810516] ieee80211 phy0: device no longer idle - scanning [ 4125.471954] ieee80211 phy0: device now idle [ 4152.802093] ieee80211 phy0: device no longer idle - scanning [ 4155.483062] ieee80211 phy0: device now idle [ 4192.788787] ieee80211 phy0: device no longer idle - scanning [ 4195.454528] ieee80211 phy0: device now idle -- You received this bug notification because you are a member of TI OMAP Developers, which is subscribed to linaro-landing-team-ti. https://bugs.launchpad.net/bugs/880773 Title: Panda: suspend/resume not working Status in Linaro Android: Confirmed Status in Linaro Texas Instruments Landing Team: Fix Committed Status in Linaro Ubuntu Evaluation Builds: Fix Committed Bug description: Hwpack: hwpack_linaro-lt-panda-x11-base_20111023-0_armel_supported.tar.gz Image: linaro-o-ubuntu-desktop-tar-20111023-0.tar.gz Suspended the system from desktop menu. After that, resume is not working on pressing USB keyboard/mouse. Even when suspended using "echo mem > /sys/power/state" the desktop is not restored on keyboard/mouse press. To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-android/+bug/880773/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~tiomap-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~tiomap-dev More help : https://help.launchpad.net/ListHelp
