The second issue, with the cpuidle test set, is actually a bug at the test case.
The problem is that in case the cpuidle_killer program fails, it'll exit with 1, which will break the current logic from the shell script and will abort the remaining tests. About the failure, this is expected for Panda (with 3.3) as cpuidle is disabled at the kernel to avoid overheating issues with 4460. -- You received this bug notification because you are a member of TI OMAP Developers, which is subscribed to linaro-landing-team-ti. https://bugs.launchpad.net/bugs/881362 Title: lava-test powermanagement fails on panda Status in Linaro Texas Instruments Landing Team: New Status in Linaro Ubuntu Evaluation Builds: Confirmed Bug description: Hwpack: http://snapshots.linaro.org/oneiric/lt-panda-x11-base- oneiric/20111023/0/images/hwpack/hwpack_linaro-lt- panda-x11-base_20111023-0_armel_supported.tar.gz Image: http://snapshots.linaro.org/oneiric/linaro-o-ubuntu- desktop/20111023/0/images/tar/linaro-o-ubuntu-desktop- tar-20111023-0.tar.gz 'lava-test run pwrmgmt' generates following log: $ cat ~/.local/share/lava_test/results/pwrmgmt.2011-10-24T13\:04\:11Z/testoutput.log make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils' make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq' rm -f cpufreq_01.log cpufreq_02.log cpufreq_03.log cpufreq_04.log cpufreq_05.log cpufreq_06.log cpufreq_07.log cpufreq_08.log cpufreq_09.log ### ### cpufreq_01: ### test the cpufreq framework is available for frequency ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_01 ### cpufreq_01.0/cpu0: checking 'scaling_available_frequencies' exists... pass cpufreq_01.1/cpu0: checking 'scaling_cur_freq' exists... pass cpufreq_01.2/cpu0: checking 'scaling_setspeed' exists... pass cpufreq_01.0/cpu1: checking 'scaling_available_frequencies' exists... pass cpufreq_01.1/cpu1: checking 'scaling_cur_freq' exists... pass cpufreq_01.2/cpu1: checking 'scaling_setspeed' exists... pass ### ### cpufreq_02: ### test the cpufreq framework is available for governor ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_02 ### cpufreq_02.0/cpu0: checking 'scaling_available_governors' exists... pass cpufreq_02.1/cpu0: checking 'scaling_governor' exists... pass cpufreq_02.0/cpu1: checking 'scaling_available_governors' exists... pass cpufreq_02.1/cpu1: checking 'scaling_governor' exists... pass ### ### cpufreq_03: ### test the governor change is effective ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_03 ### cpufreq_03.0: run as non-root... skip ### ### cpufreq_04: ### test the change of the frequency is effective in 'userspace' mode ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_04 ### cpufreq_04.0: run as non-root... skip ### ### cpufreq_05: ### test 'ondemand' and 'conservative' trigger correctly the configuration directory ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_05 ### cpufreq_05.0: run as non-root... skip ### ### cpufreq_06: ### test the change of the frequencies affect the performances of a test program ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_06 ### cpufreq_06.0: run as non-root... skip ### ### cpufreq_07: ### test the load of the cpu affects the frequency with 'ondemand' ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_07 ### cpufreq_07.0: run as non-root... skip ### ### cpufreq_08: ### test the load of the cpu does not affect the frequency with 'userspace' ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_08 ### cpufreq_08.0: run as non-root... skip ### ### cpufreq_09: ### test the load of the cpu does not affect the frequency with 'powersave' ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_09 ### cpufreq_09.0: run as non-root... skip make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq' make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug' rm -f 1_sanity_check.log cpuhotplug_01.log cpuhotplug_02.log cpuhotplug_03.log cpuhotplug_04.log cpuhotplug_05.log cpuhotplug_06.log cpuhotplug_07.log cpuhotplug_08.log z_sanity_check.log ### ### 1_sanity_check: ### ensure all the cpus are online before the tests ### ### 1_sanity_check.0: checking all cpu are online... pass ### ### cpuhotplug_01: ### test the sysfs files are present ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_01 ### cpuhotplug_01.0: checking 'online' exists... pass cpuhotplug_01.1: checking 'offline' exists... pass cpuhotplug_01.2: checking 'possible' exists... pass cpuhotplug_01.3: checking 'present' exists... pass cpuhotplug_01.0/cpu0: checking 'online' exists... pass cpuhotplug_01.0/cpu1: checking 'online' exists... pass ### ### cpuhotplug_02: ### test the cpu state is reflected in sysfs ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_02 ### cpuhotplug_02.0/cpu1: checking cpu is offline... fail ### ### cpuhotplug_03: ### test the affinity does not work on an offline cpu ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_03 ### cpuhotplug_03.0/cpu1: checking setting affinity on cpu fails... fail ### ### cpuhotplug_04: ### test task is migrated with task affinity ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_04 ### cpuhotplug_04.0/cpu1: checking affinity is set... fail cpuhotplug_04.1/cpu1: checking offlining a cpu with affinity succeed... fail cpuhotplug_04.2/cpu1: checking affinity changed... pass ### ### cpuhotplug_05: ### test cpus are reflected on /proc/cpuinfo correctly ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_05 ### processor : 1 cpuhotplug_05.0/cpu1: checking offline processor not found in cpuinfo... fail ### ### cpuhotplug_06: ### test interrupts show the right configuration in /proc/interrupts ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_06 ### CPU0 CPU1 cpuhotplug_06.0/cpu1: checking offline processor not found in interrupts... fail ### ### cpuhotplug_07: ### test userspace notification ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_07 ### cpuhotplug_07.0/cpu1: checking offline event was received... fail cpuhotplug_07.1/cpu1: checking online event was received... fail ### ### cpuhotplug_08: ### test userspace notification ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_08 ### cpuhotplug_08.0: checking cpu1 is offline... fail cpuhotplug_08.1: checking cpu1 is online... fail ### ### z_sanity_check: ### ensure all the cpus are online when the tests are finished ### ### z_sanity_check.0: checking all cpu are back online... pass make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug' make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/sched_mc' rm -f sched_01.log sched_02.log sched_03.log sched_04.log ### ### sched_01: ### test the presence of the 'sched_mc_power_savings' file ### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#sched_mc_01 ### sched_01.0: checking 'sched_mc_power_savings' exists... fail make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/sched_mc' To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-landing-team-ti/+bug/881362/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~tiomap-dev Post to : tiomap-dev@lists.launchpad.net Unsubscribe : https://launchpad.net/~tiomap-dev More help : https://help.launchpad.net/ListHelp
