You have been subscribed to a public bug by Winston Smith (smith-winston-101):
After performing a BRAND NEW installation of ubuntu-12.10-server-
armhf+omap4.img on an OMAP4 Pandaboard (Rev A2), the system apparently
completed the installation, the installer asked if it could reboot, I
saw the "Requesting system restart" message and nothing further
happened.
I then went to manually power cycle the unit, but it does nothing at
all, I don't even see the u-boot messages coming up. The activity LEDs
on the board also behave differently from a normal boot (STATUS1 comes
on and stays lit, there is no other LED activity, including the Ethernet
LEDs.
NOTE: That this behavior is exactly the same as when I tried to upgrade
an existing 12.04 system to 12.10 (see bug #1076447)
If I mount the SD card on Mac OS X, and run the 'ls' command, it appears
that the fat32 partition is corrupt or damaged:
mbp:~ winston$ ls -al /Volumes/SERVICEV001/
ls: MLO.
␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀␀剅䥖䕃ざt.biꤨ䅭:
No such file or directory
total 28836
drwxrwxrwx 1 winston staff 1536 Jan 1 1980 .
drwxrwxrwt@ 7 root admin 238 Nov 13 22:10 ..
drwxrwxrwx 1 winston staff 512 Nov 13 17:49 .Spotlight-V100
drwxrwxrwx@ 1 winston staff 512 Nov 13 17:49 .Trashes
-rwxrwxrwx 1 winston staff 4096 Nov 13 17:49 ._.Trashes
drwxrwxrwx 1 winston staff 512 Nov 13 22:10 .fseventsd
-rwxrwxrwx 1 winston staff 26960 Oct 17 18:28 MLO
-rwxrwxrwx 1 winston staff 72 Nov 14 2012 preEnv.txt
-rwxrwxrwx 1 winston staff 39 Oct 17 18:28 preEnv.txt-old
-rwxrwxrwx 1 winston staff 97 Oct 17 18:28 preEnv.txt-serial
-rwxrwxrwx 1 winston staff 97 Nov 13 19:54 preEnv.txt.bak
-rwxrwxrwx 1 winston staff 119 Nov 14 2012 uEnv.txt
-rwxrwxrwx 1 winston staff 119 Oct 17 18:28 uEnv.txt.bak
-rwxrwxrwx 1 winston staff 4276960 Nov 14 2012 uImage
-rwxrwxrwx 1 winston staff 4276960 Oct 17 18:28 uImage.bak
-rwxrwxrwx 1 winston staff 1853248 Nov 14 2012 uInitrd
-rwxrwxrwx 1 winston staff 4318492 Oct 17 18:28 uInitrd.bak
NOTE2: After writing the image to the SD card and before attempting to boot,
you must replace preEnv.txt with preEnv.txt-serial otherwise there is no
console and you cannot perform the installation (this is not documented that I
could see!).
** Affects: live-installer (Ubuntu)
Importance: Undecided
Status: New
** Tags: armhf install omap
--
Installation fails on OMAP4/Pandaboard (RevA2)
https://bugs.launchpad.net/bugs/1078559
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to the bug report.
_______________________________________________
Mailing list: https://launchpad.net/~tiomap-dev
Post to : tiomap-dev@lists.launchpad.net
Unsubscribe : https://launchpad.net/~tiomap-dev
More help : https://help.launchpad.net/ListHelp
