Erik has left Ericsson and does not work with TIPC any more. For the rest of
us, I guess we are all on Christmas/New Hear Holiday, so you will have to wait
until January before you receive a qualified answer.As for increasing
MAX_BEARER, I dont see any problem with doing that for getting around your
problem, but it is of course not a tenable long term solution. I will look into
this when I am back at work.
Regards///jon
De : jason <[email protected]>
À : "[email protected]"
<[email protected]>
Envoyé le : mercredi 23 décembre 2015 1h29
Objet : Re: [tipc-discussion] About MAX_BEARER and unicast ip bearer
I found that in Erik's iproute2 tree, the tipc command DO support udp port
configuration, but need a little modification:
https://github.com/Hugne/iproute2/pull/1 ,please take a look at my pull
request above.
So I have only one question left in these thread. Can I simply enlarge
MAX_BEARER to make more possible unicast udp bearers and links?
On Wednesday, December 23, 2015, jason <[email protected]> wrote:
> Hi All,
> Currently, the MAX_BEARER is set to 3. If I use ip bearer that means only
> 3 potential peers can be configured(when multicast is not allowed).
> Furthermore, in order to config three ip bearers, I need to uses three
> different local ip address, which sometimes is not more applicable than
> using different udp ports. But port number is fixed to 6118. So is there
> any plan to enlarge MAX_BEARER and support configurable port number for ip
> bearer, or any other ways to solve my problem? To say set MAX_BEARER to 8
> may be enough for me.
>
>
> --
> Yours,
> Jason
>
--
Yours,
Jason
------------------------------------------------------------------------------
_______________________________________________
tipc-discussion mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tipc-discussion
------------------------------------------------------------------------------
_______________________________________________
tipc-discussion mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tipc-discussion
