I tried the TS-570D with xlog and hamlib and had similar problems. Strangely, grig works for the most part (it talks to the radio but a few functions don't respond). I'll see if I can figure out what is happening or ask on the hamlib list. I'll also finish the I/O card for my K2 and give that a try.
Bob, N7XY On Wed, 2005-05-04 at 12:13 +0200, Rein Couperus PA0R wrote: > I have tlf-0.9.23 running without problem with hamblib 1.2.4 and the > ORION (rig nr. 1608). Also no problem with the K2. > > my config.h says: > > /* Define if you have the <hamlib/riglist.h> header file. */ > /* #undef HAVE_HAMLIB_RIGLIST_H */ > > /* Define if you have the <hamlib/rig.h> header file. */ > #define HAVE_HAMLIB_RIG_H 1 > > /* Define if you have the <inttypes.h> header file. */ > #define HAVE_INTTYPES_H 1 > > /* Define if you have the `hamlib' library (-lhamlib). */ > #define HAVE_LIBHAMLIB 1 > > Looks like tlf does not need riglist.h > > Moreover, the error message you get is not from tlf, but from hamlib, so > I would look in that direction... > > Anybody else have problems with the TS570D ? > > Rein PA0R > > > > > > On Mon, 2005-05-02 at 16:55 -0700, Bob Nielsen wrote: > > I finally got around to trying to interface my TS-570D to my computer. > > It works fine with grig, but I haven't been able to get the rig to talk > > to TLF. > > > > I ran configure with --enable-hamlib. It appears to recognize hamlib: > > > > checking for main in -lhamlib... yes > > checking hamlib/rig.h usability... yes > > checking hamlib/rig.h presence... yes > > checking for hamlib/rig.h... yes > > enabling hamlib support > > > > However, checking the resultant config.h, I see: > > > > > > /* Define if you have the <hamlib/riglist.h> header file. */ > > /* #undef HAVE_HAMLIB_RIGLIST_H */ > > > > However, /usr/include/hamlib/riglist.h exists. > > > > I compiled TLF and enabled rig control in logcfg.dat, setting RIGMODEL, > > RIGSPEED and RIGPORT to the appropriate values. When I run TLF, I get > > the following: > > > > Trying to start rig ctrl > > rig_open: error > > > > Editing config.h to define HAVE_HAMLIB_RIGLIST_H doesn't help > > > > TLF is version 0.9.23 and hamlib-dev is version 1.2.4-1. The system is > > a 1.2 GHz Celeron running Libranet 2.8.1 updated with packages from > > Debian Sarge and Sid. > > > > Any ideas? > > > > TIA and 73, > > > > Bob, N7XY > > > > > _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/tlf-devel
