> On Fri, 2005-05-06 at 03:42 -0400, Ed wrote: > > Bob Nielsen wrote: > > > I tried the TS-570D with xlog and hamlib and had similar problems. > > > Strangely, grig works for the most part (it talks to the radio but a few > > > functions don't respond). I'll see if I can figure out what is > > > happening or ask on the hamlib list. I'll also finish the I/O card for > > > my K2 and give that a try. > > > > > > Bob, N7XY > > > > > > On Wed, 2005-05-04 at 12:13 +0200, Rein Couperus PA0R wrote: > > > > > >>I have tlf-0.9.23 running without problem with hamblib 1.2.4 and the > > >>ORION (rig nr. 1608). Also no problem with the K2. > > >> > > >>my config.h says: > > >> > > >>/* Define if you have the <hamlib/riglist.h> header file. */ > > >>/* #undef HAVE_HAMLIB_RIGLIST_H */ > > >> > > >>/* Define if you have the <hamlib/rig.h> header file. */ > > >>#define HAVE_HAMLIB_RIG_H 1 > > >> > > >>/* Define if you have the <inttypes.h> header file. */ > > >>#define HAVE_INTTYPES_H 1 > > >> > > >>/* Define if you have the `hamlib' library (-lhamlib). */ > > >>#define HAVE_LIBHAMLIB 1 > > >> > > >>Looks like tlf does not need riglist.h > > >> > > >>Moreover, the error message you get is not from tlf, but from hamlib, so > > >>I would look in that direction... > > >> > > >>Anybody else have problems with the TS570D ? > > >> > > >>Rein PA0R > > >> > > >> > > >> > > >> > > >> > > >>On Mon, 2005-05-02 at 16:55 -0700, Bob Nielsen wrote: > > >> > > >>>I finally got around to trying to interface my TS-570D to my computer. > > >>>It works fine with grig, but I haven't been able to get the rig to talk > > >>>to TLF. > > >>> > > >>>I ran configure with --enable-hamlib. It appears to recognize hamlib: > > >>> > > >>>checking for main in -lhamlib... yes > > >>>checking hamlib/rig.h usability... yes > > >>>checking hamlib/rig.h presence... yes > > >>>checking for hamlib/rig.h... yes > > >>>enabling hamlib support > > >>> > > >>>However, checking the resultant config.h, I see: > > >>> > > >>> > > >>>/* Define if you have the <hamlib/riglist.h> header file. */ > > >>>/* #undef HAVE_HAMLIB_RIGLIST_H */ > > >>> > > >>>However, /usr/include/hamlib/riglist.h exists. > > >>> > > >>>I compiled TLF and enabled rig control in logcfg.dat, setting RIGMODEL, > > >>>RIGSPEED and RIGPORT to the appropriate values. When I run TLF, I get > > >>>the following: > > >>> > > >>>Trying to start rig ctrl > > >>>rig_open: error > > >>> > > >>>Editing config.h to define HAVE_HAMLIB_RIGLIST_H doesn't help > > >>> > > >>>TLF is version 0.9.23 and hamlib-dev is version 1.2.4-1. The system is > > >>>a 1.2 GHz Celeron running Libranet 2.8.1 updated with packages from > > >>>Debian Sarge and Sid. > > >>> > > >>>Any ideas? > > >>> > > >>>TIA and 73, > > >>> > > >>>Bob, N7XY > > > > > > Bob, you do have hamlib-utils installed don't you. ?? I think you will > > find it is needed for the apps you have installed. Not sure it is just a > > Debian thing or not. TIA....73 > > > > Ed W3NR > > Yes I do have hamlib-utils installed. I had forgotten that it was on > the system. I will try the rigctl program included in that package to > check things out and maybe I can get a clearer picture of what is > happening. > > Bob, N7XY >
_______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/tlf-devel
