The arrlss config is just a bare minimum, you have to add the rest to your liking. I have found the current config file to work w/o a problem except for leaving out a minor part of the exchange, which you can search/replace into the cabrillo file when you're done [just one search/replace action is needed to fix the exchange according to ARRL Cabrillo specification, which can be found on the ARRL Cabrillo web page]. Note I don't use memory keyer, so I don't know about that part. The important items are the 7 items at the bottom of the file. Good luck in the test!
# ################################# # # # TLF-LOGCFG.DAT v. 0.9.21 # # # # Uncomment the options you # # want to enable. See tlf.doc # # for a description of the # # options. You can keep diff- # # erent versions for different # # contests. I keep separate # # configuration files for # # each contest. If you enable # # more than 1 mutually exclu- # # sive options, the last one # # will be efective. # # # # # ################################# # #CTCOMPATIBLE # ################################# # # # EDITOR # # # ################################# # EDITOR=joe #EDITOR=vi #EDITOR=e3 #EDITOR=MC # ################################# # # # CALL # # # ################################# # CALL=ny6p # # ################################# # # # Time offset from UTC # # # ################################# #Leave this at 0, I've had prob's with other settings TIME_OFFSET=0 TIME_MASTER # ################################# # # # LAN PORT # # # ################################# # addnode only OTHER nodes !! # #ADDNODE=10.0.0.115 #ADDNODE=192.168.1.2 # THISNODE=A # LAN_DEBUG # ################################# # # # KEYERPORT # # # ################################# # #NETKEYER #NETKEYERPORT=6789 #NETKEYERHOST=127.0.0.1 # ################################# # # # KEYERPARAMETERS #Cant vouch for this part! # # ################################# #---speed (6 ... 60 wpm) CWSPEED=30 #---weight (-5 ... 5 ms) WEIGHT=1 #---cq delay (s) CQDELAY=20 #---txdelay (ms) TXDELAY=2 #---sidetone (200...800, 0 = mute) CWTONE=800 ################################# # # # PACKET INTERFACE # # # ################################# # Cluster: PI4TUE (Eindhoven) TELNETHOST=131.155.192.179 TELNETPORT=8000 #automatic login################# CLUSTERLOGIN=ny6p #write log to disk############### #CLUSTER_LOG # #use tnc instead of telnet####### #TNCPORT=/dev/ttyS0 #TNCPORT=/dev/ttyUSB1 #TNCSPEED=9600 # #get clusterinfo from network#### #FIFO_INTERFACE # ################################# # # # RADIO CONTROL # # (comment out if not present) # # Rigmodel = Hamlib index, here # # for ten tec OMNI VI # ################################# #Use your model! RADIO_CONTROL RIGMODEL=228 RIGSPEED=9600 RIGPORT=/dev/ttyS0 #RIGPORT=/dev/ttyUSB2 # #SSBMODE # #RIT_CLEAR # #SHOW_FREQUENCY # ################################# # # # INFORMATION WINDOWS # # # ################################# # CLUSTER #BANDMAP SPOTLIST #FILTER # SCOREWINDOW # CHECKWINDOW ################################# # # # CHECK PARTIAL FUNCTION # # # ################################# # PARTIALS #USEPARTIALS #MANY_CALLS # ################################# # # # CONDX (info for muf calc.) # # # ################################# # SUNSPOTS=18 SFI=75 # ################################# # # # Misc commands # # # ################################# # No automatic 'qso before msg' NOB4 # # No automatic cq #NOAUTOCQ # # Left/right arrows don't change band... #NO_BANDSWITCH_ARROWKEYS # # Here is the really important stuff! MARKERS=tlfmarkers CONTEST=arrl_ss MULT_LIST=arrlsections CONTEST_MODE TWO_POINTS LOGFILE=ss.log #This last one means only one contact per contest not per band RECALL_MULTS #############END################# -- Lee <NY6P> _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/tlf-devel
