On Tue, 12 Dec 2006 21:35:14 +0000 [EMAIL PROTECTED] wrote:
[...] > > If I understand the notes in cwdaemon correctly it will default to use > /dev/lp0. I believe the cwdaemon is working because the sidetone & voice > keyer work just fine. If I want to change the port for cwdaemon from lp0 to > something else, where can I do this? If cwdaemon defaults to lp0, the I > should be able to see activity on the relevant pin using a oscilloscope or > voltmeter when TLF is sending - yes? > Hi Rob, yes, when sending dot's a blockwave should appear. Changing the port should be easy, they are called parport0, parport1, etc on linux (See 'man cwdaemon' or 'cwdaemon -h'). As the notes say: remove the lp kernel module (which is used for printing) and make sure the ppdev module is loaded. > In summary, hamlib and rig control use ttyS0 (set in the logcfg.dat file) and > cwdaemon will use lp0 as default - do I have this correct? I realize these > can be configured to use other ports and I have read about those set-ups on > this list; but I am just trying to make sure I understand this set-up > properly. > The default is always parport0. I would be interested to know if the PTT is still working, since I have been doing lots of code changes from 0.9.2 to 0.9.4. > > 73 > > Rob, N6ROB > Regards, Joop PG4I _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/tlf-devel