Hi Rein and others, On Sat, Dec 05, 2009 at 12:25:18PM +0100, Rein Couperus wrote: > I did the following to get tlf-1.0.0pre going with hamlib: > > * check if libhamlib-dev is on your system, if not sudo apt-get install > libhamlib-dev > * in the TLF-1.0.0pre directory, do a make clean > * ./configure --enable-hamlib > * make > * sudo make install
normally ./configure should complain if called with --enable-hamlib and hamlib not installed. tlf-1.0.0pre works here on 64bit Gentoo without problems. My Ts570D (rigmodel 204) works good. Only problem is I get always the smallest bandwidth (50 Hz) on CW which is a little bit small. I will look into iti if I find time. Some minor quirks: - version should be 1.0.0pre, but that got corrected in SVN in meantime. - From package managers point of view, a lower case naming (tlf-1.0.0) for the tar.gz and also the contained directory would be easier to handle. - The SVN repository contains some files which are part of a normal distribution, but should not be in SVN because they gets automatically i build (e.g. autom4tecache, Makefile, Makefile.in and others). I will have a look to it and clean up the repo, but give a readme how to prepare the package after checkout for distribution (in next few days). 73, de Tom DL1JBE. -- "Do what is needful!" Ursula LeGuin: Earthsea -- _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/tlf-devel