Hi Ervin and Ed,
just my 2 ct's.
Am Sun, 22 Dec 2013 20:25:53 +0100
schrieb Ervin Hegedüs - HA2OS <airw...@gmail.com>:
> Hello Ed,
>
> thanks for the answer,
>
> On Sun, Dec 22, 2013 at 01:33:28PM -0500, Ed wrote:
> > On 12/22/2013 01:10 PM, Ervin Hegedüs - HA2OS wrote:
> > >Hello,
> >
> > >S&P_TU_MSG=
> >
> > Your missing the message that goes in the above. Move what you have
> > in the ALT_3 and it should now work.
> >
> > >
> > >ALT_3=CFM ++5NN-- #
> >
> > >But when I hear a station, and type callsign, on ALT+3 Tlf send
> > >the ALT_3 message ("CFM 5NN SERIAL"), but when I press the enter
> > >to save the QSO, Tlf send my callsign again - and I don't know
> > >why.
> >
> > As Above.
>
> so, that's clear, very clear - but... :)
>
> May be I just complicate this S&P mode, but I think it would be
> better to send a message to RUN station when I press ENTER (which
> configured for ALT+3 now), and when all thing is right, and
> station acknowledged my report, then I can save the QSO _without_
> any message. But as I wrote above, may be that's just my
> misunderstanding.
What is wrong with the sequence below?
run station you
------------------------------------
test de xy2xyz
xy2xyz <enter> (sends your call)
(if he did not here you
just press <enter> again)
ha2os 5nn 123
type in <123> and press <enter>
(sends SP_TU_MSG and logs qso)
if he does not understand
and send <agn?>
press '_' (sends 'nr #' again)
So minimum is: Enter call <enter> enter nr send by him <enter>
As far as I know it is handled similar by other contest programs.
>
> Anyhow, I check this config as you wrote, and it works as you
> wrote :), I'll try to adapt this way :).
>
>
> Just an idea: may be it could be good to implement a short key to
> save the QSO without send any TU message - what is your opinion?
>
Please read Ed's message again: '\' does what you are looking for.
>
> > >What I'm missing, and what is the correct way to use the two
> > >modes of Tlf?
> >
> > Use + to switch between RUN & S&P. In S&P remember the 2nd Enter
> > sends th TU message. Use F2 to repeat your call till the RUN station
> > calls you.
Or simply press <enter>
73, de Tom DL1JBE.
>
> yes, that's what I missed out,
>
> > >On the previous contest, I only used RUN mode, but CQ_TU_MSG and
> > >S&P_TU_MSG were set up as empty string, and when I type an ENTER
> > >after I typed callsign, Tlf just save the QSO "silent".
> >
> > That's because the 2 strings were empty. All of this I would imagine
> > has been hard coded by Rein. But it works and works well. But you
> > cannot change the Enter sequence in either RUN or S&P.
> >
> > I would have copied the template rules file and change only what is
> > needed. I normally do not change the macros or the TU messages.
>
> thanks for all, Ed, my New Year's resolution is "I will never use
> Tlf without TU messages" :)
>
>
> 73,
>
>
> Ervin
>
>
> HA2OS
>
>
--
"Do what is needful!"
Ursula LeGuin: Earthsea
--
_______________________________________________
Tlf-devel mailing list
Tlf-devel@nongnu.org
https://lists.nongnu.org/mailman/listinfo/tlf-devel
