Hello Ed, thanks for your reply,
On Mon, Dec 30, 2013 at 04:16:38PM -0500, Ed wrote: > On 12/30/2013 03:06 PM, Ervin Hegedüs - HA2OS wrote: > >Hello Ed, > > >>I don't use this feature at all. I can select bandwidth at the rig > >>with a turn of the knob. > > > >and what's happening when you switch the band? The filter(s) keeps > >the value(s) which you had been set manually, or goes to the > >least value? > > > >What is your RIG model? > > > I use a FT-950 and the filter bandwidth changes band to band to what > I set it for, for that particular band. hmm... I use TS850, and if I don't set the CWBANDWIDTH parameter in logcfg.dat, then both filter (8.83MHz and 455kHz) switch to the least state, if I change the band. Vainly I change them to a custom values, after I switch the band, they goes back. Always. Now I check it out once again, and that's the situation what I describe in my first e-mail. Could anybody checks it with other rigs? 73, Ervin -- I � UTF-8 _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org https://lists.nongnu.org/mailman/listinfo/tlf-devel