Some considerations for ML-KEM alone (or another trusted PQ-only key agreement) are mainly looking towards the desired next step after hybrid key agreement, and instead of leaving that fuzzy and far off, talking about it in the present. This is also motivated by -hybrid-design allowing several traditional NamedGroups to be negotiated on their own, as hybrid NamedGroups with ML-KEM (although currently both are specified as Kyber but those will change), but no option to negotiate the other side of the hybrid alone, the PQ algorithm alone, Shaking out all the negotiation decisions is desirable as well as 'drawing the rest of the owl' for the pure PQ option implied in the negotiation (are we going to copy the same ~1000 bytes for the PQ and hybrid name groups, when sharing an ephemeral KEM keypair?).
For CNSA 2.0, it is cited not as a compatibility _requirement_ of TLS, but a note that a non-trivial segment of users of standard TLS that have been traditionally compliant will not be in a few years, and they will come knocking anyway. This is trying to skate where the puck is going. But also, the fact that CNSA 2.0 explicitly requires ML-KEM _only_ key agreement in the next ~6-9 years is a strong vote of confidence in any protocol doing this at all, so, TLS wouldn't be out on a limb to support this, basically. I don't have a strong opinion on whether this should be Recommended = Y. On Wed, Mar 13, 2024 at 6:42 PM Eric Rescorla <e...@rtfm.com> wrote: > > > On Wed, Mar 13, 2024 at 2:36 PM Rebecca Guthrie <rmguthr= > 40uwe.nsa....@dmarc.ietf.org> wrote: > >> Greetings Deirdre and TLS, >> >> >> >> I read through draft-connolly-tls-mlkem-key-agreement-00 (and >> https://github.com/dconnolly/draft-connolly-tls-mlkem-key-agreement/blob/main/draft-connolly-tls-mlkem-key-agreement.md) >> and I have a few comments. First, though, I want to say thank you for >> writing this draft. I'll echo some of what has already been voiced on this >> thread and say that, while some plan to use composite key establishment, it >> makes sense to also specify the use of standalone ML-KEM in TLS 1.3 as >> another option. Other WGs (lamps and ipsecme) have already begun to specify >> the use of standalone FIPS 203, 204, and 205 in various protocols. With >> respect to this draft, there is certainly interest from National Security >> System vendors in using standalone ML-KEM-1024 in TLS 1.3 for CNSA 2.0 >> compliance (as CNSA 2.0 does not require nor recommend hybrid solutions for >> security). >> > > I wanted to address this CNSA 2.0 point, as I've now seen it brought up a > couple of times. > > The IETF, together with the IRTF, needs to make an independent judgement > on whether using PQ-only algorithms is advisable, and if we do not think > so, then we should not standardize them, regardless of what CNSA 2.0 > requires. The supported groups registry policies are designed explicitly to > allow people to register non Standards Track algorithms, so nothing > precludes the creation of an ML-KEM only code point if some vendors find > that necessary, without the IETF standardizing them or marking them as > Recommended=Y. > -Ekr > > > > >> >> A few specific comments: >> >> >> >> 1. In Section 1.1 (or Introduction - Motivation in the github version), I >> would suggest that the second sentence ("Having a fully post-quantum...") >> is not needed, i.e. that there need not be a justification for why it is >> necessary to specify how to use ML-KEM in TLS 1.3 (vs. hybrid). It could be >> appropriate to contextualize the specification of ML-KEM w.r.t the advent >> of a CRQC, though I also don't think that is necessary. As an example, we >> can compare to the Introduction in draft-ietf-lamps-cms-kyber-03. >> >> >> >> 2. Section 3 (Construction on github) currently reads, "We align with >> [hybrid] except that instead of joining ECDH options with a KEM, we just >> have the KEM as a NamedGroup." I think it is a more useful framing to base >> this specification (for the use of a standalone algorithm) off of RFC 8446 >> instead of the draft spec for a hybrid solution. I understand wanting to >> align the approach with the approach taken for the hybrid solution, but I >> don't think that fact needs to be explicitly documented in this draft. When >> this draft is standardized, I think it's important that it is able to be >> read, understood, and implemented without needing to refer to the hybrid >> draft. It could be stated (how it is in the hybrid draft), "ML-KEM-512 (if >> included), ML-KEM-768, and ML-KEM-1024 are represented as a NamedGroup and >> sent in the supported_groups extension." >> >> >> >> 3. On a related note, the hybrid draft says, "Note that TLS 1.3 uses the >> phrase "groups" to refer to key exchange algorithms -- for example, the >> supported_groups extension -- since all key exchange algorithms in TLS 1.3 >> are Diffie-Hellman-based. As a result, some parts of this document will >> refer to data structures or messages with the term "group" in them despite >> using a key exchange algorithm that is not Diffie-Hellman-based nor a >> group." >> >> This seems okay, but on the IANA registry for TLS Supported Groups, it >> indicates 0-255 and 512-65535 are for elliptic curve groups, and 256-511 >> are for FFDH groups. Where does ML-KEM fit in? Do ranges need to be >> re-evaluated? As an example, for IKEv2, RFC 9370 changes the name of >> Transform Type 4 from Diffie-Hellman Group to Key Exchange Method in order >> to accommodate QR KEMs. >> >> >> >> 4. In the Discussion section (on github), does the portion on failures >> need to contain more information about how a failure should be handled in >> TLS? Should a decrypt_error alert be sent? >> >> >> >> 5. In Section 4 (or Security Considerations on github), this may be a >> silly question, but is the definition of "commits" well-understood (in the >> first sentence on datatracker; in the first sentence of Binding properties >> on github)? It is not used in RFC 8446 so it might be worth explaining the >> meaning or using different phrasing in this sentence. >> >> >> >> Also, what are the WG's thoughts on including standalone PQC signatures >> in the same draft? >> >> >> >> Thanks in advance! >> >> >> >> Rebecca >> >> >> >> Rebecca Guthrie >> >> she/her >> >> Center for Cybersecurity Standards (CCSS) >> >> Cybersecurity Collaboration Center (CCC) >> >> National Security Agency (NSA) >> >> >> >> *From:* TLS <tls-boun...@ietf.org> *On Behalf Of * Deirdre Connolly >> *Sent:* Tuesday, March 5, 2024 9:15 PM >> *To:* TLS@ietf.org >> *Subject:* [TLS] ML-KEM key agreement for TLS 1.3 >> >> >> >> I have uploaded a preliminary version of ML-KEM for TLS 1.3 >> <https://datatracker.ietf.org/doc/draft-connolly-tls-mlkem-key-agreement/> >> and have a more fleshed out >> <https://github.com/dconnolly/draft-tls-mlkem-key-agreement> version to >> be uploaded when datatracker opens. It is a straightforward new >> `NamedGroup` to support key agreement via ML-KEM-768 or ML-KEM-1024, in a >> very similar style to -hybrid-design >> <https://datatracker.ietf.org/doc/draft-ietf-tls-hybrid-design/>. >> >> >> >> It will be nice to have pure-PQ options (that are FIPS / CNSA 2.0 >> compatible) ready to go when users are ready to use them. >> >> >> >> Cheers, >> >> Deirdre >> _______________________________________________ >> TLS mailing list >> TLS@ietf.org >> https://www.ietf.org/mailman/listinfo/tls >> >
_______________________________________________ TLS mailing list TLS@ietf.org https://www.ietf.org/mailman/listinfo/tls
