Mi se pare ciudat totusi ca apare de 8GB. El intradevar are sectoare de rezerva. Dar sa fie inca 7GB mi se pare cam mult. Si chiar daca ar fi adevarat, de ce s-au "activat". Asta ar trebui sa fie facut doar de fabrica. Poti sa te uiti daca cel de 8GB are acelasi nr. de sectoare? Este aceeasi firma/model? Sunt chiar surprins, si as vrea sa le vad pe ambele.
Teodor Robas wrote: > Flash-ul e de 1 GB fara doar si poate (il am de aproape 2 ani). > Problema a aparut imediat dupa ce am folosit drive-ul nou de 8 GB, si > presupun ca driverul e de vina. > > La inceput am constatat ca fisierele de pe drive aveau erori. Dupa aceeia > m-am uitat cu cfdisk si surpriza: > aveam o partitie ext3 de 1 GB si free space pana la 8 GB. L-am mai > formatat > de cateva ori (in win, > dupa cum spuneam fdisk sau cfdisk dau erori) si FAT32 de data asta. Doar > ca > drive-ul e tot de 8 GB. > > Din cate stiu eu drive-urile astea au niste algoritmi pentru optimizarea > utilizarii celulelor de memorie, > astfel incat scrierea unui fisier se face fizic oriunde in memorie unde > s-a > scris de cele mai putine ori. > Asta explica de ce atunci cand aveam o partitie de 1GB+free space > fisierele > scrise nu erau identice cu > originalul. > > Folosesc acelasi kernel 2.6.17 de destul de mult timp (pe un Slackware > 11), > iar de restarturi au avut parte > ambele calculatoare pe care am folosit stick-ul. Deseara o sa incerc si un > 2.6.21 pe un alt sistem. Totusi > am senzatia ca size-ul actual e scris in flash, si probabil va trebui sa > fac > cumva sa am access la setarile > din flash. > > > > > > On 10/15/07, Ovidiu <[EMAIL PROTECTED]> wrote: >> >> Salut, >> >> >> Cateva intrebari: >> kernel 2.4.x ? >> prima data bagi stickul de 8 si apoi il scoti si in locul lui il bagi >> pe cel de 1? >> ai mai dat restart la masina respectiva si sa bagi stickul de 1 primul >> sa vezi cum ti-l detecteaza? >> >> >> Ovi >> >> On 10/13/07, Teodor Robas <[EMAIL PROTECTED]> wrote: >> > Salut, >> > >> > Am un USB drive de 1GB, pe care l-am formatat ext3 si l-am folosit in >> win cu >> > IFS driver (http://www.fs-driver.org/) o buna bucata de vreme. >> > >> > Recent am mai luat un drive de 8 GB pe care l-am formatat si pe el >> ext3 >> > si l-am folosit pe acelasi calculator in win. Doar ca a aparut o mica >> > problema >> > cu drive-ul de 1 GB: >> > >> > usb 1-5: new high speed USB device using ehci_hcd and address 5 >> > usb 1-5: configuration #1 chosen from 1 choice >> > scsi1 : SCSI emulation for USB Mass Storage devices >> > usb-storage: device found at 5 >> > usb-storage: waiting for device to settle before scanning >> > Vendor: KINGMAX Model: USB2.0 Flashdisk Rev: 1.00 >> > Type: Direct-Access ANSI SCSI >> > revision: 02 >> > SCSI device sda: 16646144 512-byte hdwr sectors (8523 MB) >> > sda: Write Protect is off >> > sda: Mode Sense: 00 00 00 00 >> > sda: assuming drive cache: write through >> > SCSI device sda: 16646144 512-byte hdwr sectors (8523 MB) >> > sda: Write Protect is off >> > sda: Mode Sense: 00 00 00 00 >> > sda: assuming drive cache: write through >> > sda: sda1 >> > sd 1:0:0:0: Attached scsi removable disk sda >> > sd 1:0:0:0: Attached scsi generic sg1 type 0 >> > usb-storage: device scan complete >> > end_request: I/O error, dev sda, sector 16645920 >> > Buffer I/O error on device sda1, logical block 2080736 >> > end_request: I/O error, dev sda, sector 16645920 >> > Buffer I/O error on device sda1, logical block 2080736 >> > end_request: I/O error, dev sda, sector 16646136 >> > Buffer I/O error on device sda1, logical block 2080763 >> > end_request: I/O error, dev sda, sector 16646136 >> > Buffer I/O error on device sda1, logical block 2080763 >> > end_request: I/O error, dev sda, sector 16646136 >> > Buffer I/O error on device sda1, logical block 2080763 >> > end_request: I/O error, dev sda, sector 16646136 >> > Buffer I/O error on device sda1, logical block 2080763 >> > end_request: I/O error, dev sda, sector 16646136 >> > Buffer I/O error on device sda1, logical block 2080763 >> > end_request: I/O error, dev sda, sector 16646136 >> > Buffer I/O error on device sda1, logical block 2080763 >> > end_request: I/O error, dev sda, sector 16646080 >> > Buffer I/O error on device sda1, logical block 2080756 >> > end_request: I/O error, dev sda, sector 16646080 >> > Buffer I/O error on device sda1, logical block 2080756 >> > end_request: I/O error, dev sda, sector 16646128 >> > end_request: I/O error, dev sda, sector 16646128 >> > end_request: I/O error, dev sda, sector 16646136 >> > end_request: I/O error, dev sda, sector 16646136 >> > end_request: I/O error, dev sda, sector 32 >> > end_request: I/O error, dev sda, sector 32 >> > end_request: I/O error, dev sda, sector 32 >> > end_request: I/O error, dev sda, sector 32 >> > end_request: I/O error, dev sda, sector 32 >> > end_request: I/O error, dev sda, sector 72 >> > >> > and so on .... >> > >> > Si in win apare cu marimea de 8 G. >> > Mai am vreo sansa sa-l resuscitez ? >> > >> > Nici cfdisk si nici fdisk nu vor sa aiba de-a face cu el. >> > As putea macar sa-i declar o partitie in zona valida de memorie cumva >> ? >> > >> > >> > Teodor >> > >> > >> > _______________________________________________ >> > tmlug mailing list >> > [email protected] >> > http://lists.tmlug.ro/cgi-bin/mailman/listinfo/tmlug >> > >> > >> _______________________________________________ >> tmlug mailing list >> [email protected] >> http://lists.tmlug.ro/cgi-bin/mailman/listinfo/tmlug >> > _______________________________________________ > tmlug mailing list > [email protected] > http://lists.tmlug.ro/cgi-bin/mailman/listinfo/tmlug > _______________________________________________ tmlug mailing list [email protected] http://lists.tmlug.ro/cgi-bin/mailman/listinfo/tmlug
