Take a look at the log file catalina.out and see if there are any errors
there. An exception is most likely causing it to fail on startup.
Chris Pat wrote:
Hi David
Thanks for the response, however I set it to 8006,
checked to make sure nothing in that file of tc4 was
on that port, bounced tc5 and I still cant get in on
that port. This is the second un/reinstall reboot
today. Yes, it is a wintel box w2ksrvsp4. Any ideas?
--- David Smith <[EMAIL PROTECTED]> wrote:
Also set the shutdown port at the top of the
server.xml to something
other than 8005 .
--David
Chris Pat wrote:
Hi
I have tc4 working fine. Installed tc5.5.9 and set
the port to 9080 and of course a diff dir. However
I
cant connect to it at that port even tough I have
his
from the tc5 server.xml
<!-- Define a non-SSL HTTP/1.1 Connector on port
8080
-->
<Connector port="9080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25"
maxSpareThreads="75" enableLookups="false"
redirectPort="8443" acceptCount="100"
connectionTimeout="20000"
disableUploadTimeout="true"
/>
Can someone explain what additional config is
necessary to run both tc4 & tc5 on 8080 and 9080 on
the same localhost? tia.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
http://mail.yahoo.com
---------------------------------------------------------------------
To unsubscribe, e-mail:
[EMAIL PROTECTED]
For additional commands, e-mail:
[EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail:
[EMAIL PROTECTED]
For additional commands, e-mail:
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
