Those are my files in my real server running at: www.cubaonline.cu check in
the modules, at the beginning of the virtual host directive and in the
lastone virtual host that is the only one that use jsp, also check in the
server.xml, just adapt your configuration to this, is a lot of job but 100%
sure that it will work...
That's all...
Regards..
Guido.
----- Original Message -----
From: "Chauhan, Anand" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 24, 2001 4:16 PM
Subject: RE: *2* tomcats on same machine with *same* context on Apache Web
Server.
> Thanks Guido:
>
> That sounds good but I am stuck to using a single hostname for my app.
Also,
> as a matter of fact, my earlier reference didn't work with regards to
using the same
> context with two tomcats on Apache Web Server.
>
> I don't understand where I am wrong. Please help. Thanks again.
>
> Regards,
> Anand..
>
> -----Original Message-----
> From: Guido Medina [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, May 24, 2001 4:10 PM
> To: [EMAIL PROTECTED]
> Subject: Re: *2* tomcats on same machine with *same* context on Apache
> Web Server.
>
>
> You don't need to put 2 JVM, what you should do is to specify two virtual
> host in your server.xml...that's all...is better performance with
> ConnectionPool...
>
> Guido
> ----- Original Message -----
> From: "Chauhan, Anand" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, May 24, 2001 3:20 PM
> Subject: *2* tomcats on same machine with *same* context on Apache Web
> Server.
>
>
> > Hi All:
> >
> > Here is the link which does describe using two Tomcats on the same
> > machine with different connector ports. It uses different contexts as
> > seen in the example in the link below, namely,
> > ApJServMount /joe ajpv12://localhost:8007/joe
> > ApJServMount /joe ajpv12://localhost:8009/bill.
> >
> > <refer to Configuring for Multiple Tomcat JVMs >
> > http://www.crosswinds.net/~workshopx/projects/jakarta-uguide/tomcat.ug-
> > p2.tomcat-and-apache.html
> >
> >
> > However, what we need is that, we want two Tomcats on the same machine
> > BUT with a single context i.e. the url must point to the same context
> > at the end ,say 'joe'.
> > ApJServMount /joe ajpv12://localhost:8007/joe
> > ApJServMount /joe ajpv12://localhost:8009/joe
> >
> > That's the problem, we tried working on it for a long time, but it
> > fails with the *same* context. Is it possible to deploy *2* tomcats on
> Apache Web Server
> > and calling the same context each time ?!
> >
> > Let me know if following this idea is indeed possible.
> >
> > Thanks a lot.
> >
> > Regards,
> > Anand Chauhan
> >
>
<?xml version="1.0" encoding="ISO-8859-1"?>
<Server>
<!-- Debug low-level events in XmlMapper startup -->
<xmlmapper:debug level="0" />
<!--
Logging:
Logging in Tomcat is quite flexible; we can either have a log
file per module (example: ContextManager) or we can have one
for Servlets and one for Jasper, or we can just have one
tomcat.log for both Servlet and Jasper. Right now there are
three standard log streams, "tc_log", "servlet_log", and
"JASPER_LOG".
Path:
The file to which to output this log, relative to
TOMCAT_HOME. If you omit a "path" value, then stderr or
stdout will be used.
Verbosity:
Threshold for which types of messages are displayed in the
log. Levels are inclusive; that is, "WARNING" level displays
any log message marked as warning, error, or fatal. Default
level is WARNING.
verbosityLevel values can be:
FATAL
ERROR
WARNING
INFORMATION
DEBUG
Timestamps:
By default, logs print a timestamp in the form "yyyy-MM-dd
hh:mm:ss" in front of each message. To disable timestamps
completely, set 'timestamp="no"'. To use the raw
msec-since-epoch, which is more efficient, set
'timestampFormat="msec"'. If you want a custom format, you
can use 'timestampFormat="hh:mm:ss"' following the syntax of
java.text.SimpleDateFormat (see Javadoc API). For a
production environment, we recommend turning timestamps off,
or setting the format to "msec".
Custom Output:
"Custom" means "normal looking". "Non-custom" means
"surrounded with funny xml tags". In preparation for
possibly disposing of "custom" altogether, now the default is
'custom="yes"' (i.e. no tags)
Per-component Debugging:
Some components accept a "debug" attribute. This further
enhances log output. If you set the "debug" level for a
component, it may output extra debugging information.
-->
<!-- if you don't want messages on screen, add the attribute
path="logs/tomcat.log"
to the Logger element below
-->
<Logger name="tc_log"
verbosityLevel = "INFORMATION"
/>
<Logger name="servlet_log"
path="logs/servlet.log"
/>
<Logger name="JASPER_LOG"
path="logs/jasper.log"
verbosityLevel = "INFORMATION" />
<!-- You can add a "home" attribute to represent the "base" for
all relative paths. If none is set, the TOMCAT_HOME property
will be used, and if not set "." will be used.
webapps/, work/ and logs/ will be relative to this ( unless
set explicitely to absolute paths ).
You can also specify a "randomClass" attribute, which determines
a subclass of java.util.Random will be used for generating session IDs.
By default this is "java.security.SecureRandom".
Specifying "java.util.Random" will speed up Tomcat startup,
but it will cause sessions to be less secure.
You can specify the "showDebugInfo" attribute to control whether
debugging information is displayed in Tomcat's default responses.
This debugging information includes:
1. Stack traces for exceptions
2. Request URI's that cause status codes >= 400
The default is "true", so you must specify "false" to prevent
the debug information from appearing. Since the debugging
information reveals internal details about what Tomcat is serving,
set showDebugInfo="false" if you wish increased security.
-->
<ContextManager debug="0" workDir="work" showDebugInfo="true" >
<!-- ==================== Interceptors ==================== -->
<ContextInterceptor
className="org.apache.tomcat.context.LogEvents" />
<!-- ContextInterceptor
className="org.apache.tomcat.context.AutoSetup" / -->
<ContextInterceptor
className="org.apache.tomcat.context.WebXmlReader" />
<!-- Uncomment out if you have JDK1.2 and want to use policy
<ContextInterceptor
className="org.apache.tomcat.context.PolicyInterceptor" />
-->
<ContextInterceptor
className="org.apache.tomcat.context.LoaderInterceptor" />
<ContextInterceptor
className="org.apache.tomcat.context.DefaultCMSetter" />
<ContextInterceptor
className="org.apache.tomcat.context.WorkDirInterceptor" />
<!-- Request processing -->
<!-- Session interceptor will extract the session id from cookies and
deal with URL rewriting ( by fixing the URL ). If you wish to
suppress the use of cookies for session identifiers, change the
"noCookies" attribute to "true"
-->
<RequestInterceptor
className="org.apache.tomcat.request.SessionInterceptor"
noCookies="false" />
<!-- Find the container ( context and prefix/extension map )
for a request.
-->
<RequestInterceptor
className="org.apache.tomcat.request.SimpleMapper1"
debug="0" />
<!-- Non-standard invoker, for backward compat. ( /servlet/* )
You can modify the prefix that is matched by adjusting the
"prefix" parameter below. Be sure your modified pattern
starts and ends with a slash.
NOTE: This prefix applies to *all* web applications that
are running in this instance of Tomcat.
-->
<RequestInterceptor
className="org.apache.tomcat.request.InvokerInterceptor"
debug="0" prefix="/servlet/" />
<!-- "default" handler - static files and dirs. Set the
"suppress" property to "true" to suppress directory listings
when no welcome file is present.
NOTE: This setting applies to *all* web applications that
are running in this instance of Tomcat.
-->
<RequestInterceptor
className="org.apache.tomcat.request.StaticInterceptor"
debug="0" suppress="false" />
<!-- Plug a session manager. You can plug in more advanced session
modules.
-->
<RequestInterceptor
className="org.apache.tomcat.session.StandardSessionInterceptor" />
<!-- Check if the request requires an authenticated role.
-->
<RequestInterceptor
className="org.apache.tomcat.request.AccessInterceptor"
debug="0" />
<!-- Check permissions using the simple xml file. You can
plug more advanced authentication modules.
-->
<RequestInterceptor
className="org.apache.tomcat.request.SimpleRealm"
debug="0" />
<!-- UnComment the following and comment out the
above to get a JDBC realm.
Other options for driverName:
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott"
connectionPassword="tiger"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test"
connectionPassword="test"
"connectionName" and "connectionPassword" are optional.
-->
<!--
<RequestInterceptor
className="org.apache.tomcat.request.JDBCRealm"
debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:TOMCAT"
userTable="users"
userNameCol="user_name"
userCredCol="user_pass"
userRoleTable="user_roles"
roleNameCol="role_name" />
-->
<!-- Loaded last since JSP's that load-on-startup use request handling -->
<ContextInterceptor
className="org.apache.tomcat.context.LoadOnStartupInterceptor" />
<!-- ==================== Connectors ==================== -->
<!-- Normal HTTP -->
<!-- Connector className="org.apache.tomcat.service.PoolTcpConnector">
<Parameter name="handler"
value="org.apache.tomcat.service.http.HttpConnectionHandler"/>
<Parameter name="port"
value="8080"/>
</Connector -->
<!--
Uncomment this for SSL support.
You _need_ to set up a server certificate if you want this
to work, and you need JSSE.
1. Add JSSE jars to CLASSPATH
2. Edit java.home/jre/lib/security/java.security
Add:
security.provider.2=com.sun.net.ssl.internal.ssl.Provider
3. Do: keytool -genkey -alias tomcat -keyalg RSA
RSA is essential to work with Netscape and IIS.
Use "changeit" as password. ( or add keypass attribute )
You don't need to sign the certificate.
You can set parameter keystore and keypass if you want
to change the default ( user.home/.keystore with changeit )
-->
<!--
<Connector className="org.apache.tomcat.service.PoolTcpConnector">
<Parameter name="handler"
value="org.apache.tomcat.service.http.HttpConnectionHandler"/>
<Parameter name="port"
value="8443"/>
<Parameter name="socketFactory"
value="org.apache.tomcat.net.SSLSocketFactory" />
</Connector>
-->
<!-- Apache AJP12 support. This is also used to shut down tomcat.
-->
<Connector className="org.apache.tomcat.service.PoolTcpConnector">
<Parameter
name="handler"
value="org.apache.tomcat.service.connector.Ajp12ConnectionHandler"/>
<Parameter
name="port"
value="8007"/>
<Parameter
name="max_threads"
value="30"/>
<Parameter
name="max_spare_threads"
value="15"/>
<Parameter
name="min_spare_threads"
value="5"/>
</Connector>
<!-- Connector className="org.apache.tomcat.service.PoolTcpConnector">
<Parameter
name="handler"
value="org.apache.tomcat.service.connector.Ajp13ConnectionHandler"/>
<Parameter
name="port"
value="8009"/>
<Parameter
name="max_threads"
value="30"/>
<Parameter
name="max_spare_threads"
value="15"/>
<Parameter
name="min_spare_threads"
value="5"/>
</Connector -->
<!-- ==================== Special webapps ==================== -->
<!-- You don't need this if you place your app in webapps/
and use defaults.
For security you'll also need to edit tomcat.policy
Defaults are: debug=0, reloadable=true, trusted=false
(trusted allows you to access tomcat internal objects
with FacadeManager ), crossContext=true (allows you to
access other contexts via ServletContext.getContext())
If security manager is enabled, you'll have read perms.
in the webapps dir and read/write in the workdir.
-->
<!-- Context path="/examples"
docBase="webapps/examples"
crossContext="false"
debug="0"
reloadable="true" >
</Context -->
<!-- Admin context will use tomcat.core to add/remove/get info about
the webapplications and tomcat internals.
By default it is not trusted - i.e. it is not allowed access to
tomcat internals, only informations that are available to all
servlets are visible.
If you change this to true, make sure you set a password.
-->
<!-- Context path="/admin"
docBase="webapps/admin"
crossContext="true"
debug="0"
reloadable="true"
trusted="false" >
</Context -->
<Host name="www.cubaonline.cu" >
<Context path="" docBase="/home/cubaonline/public_html"
reloadable="true" debug="0"/>
</Host>
</ContextManager>
</Server>
httpd.conf